Успешное применение [CM2QLM Qualcomm]

[XURSAND]

Format

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : 5A0D0569
ID_BLOCK_L : E5A2211DAFA66A4D4418A89F73E31B3C
ID_BLOCK_L : D7215BFA3D1C36E4936AAF9AE5519DC0
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ] 
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : QE13MB
Boot Ok!

Format USER ... 
Format CACHE ... 
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:26

Reconnect Power/Cable!

MIAccount reset

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : 5A0D0569
ID_BLOCK_L : E5A2211DAFA66A4D4418A89F73E31B3C
ID_BLOCK_L : D7215BFA3D1C36E4936AAF9AE5519DC0
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ] 
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : QE13MB
Boot Ok!


MIAccount reset passed!

Device may relock back on WiFi/Network enable!


Done!
Elapsed: 00:00:49

Reconnect Power/Cable!

Read Flash

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : 5A0D0569
ID_BLOCK_L : E5A2211DAFA66A4D4418A89F73E31B3C
ID_BLOCK_L : D7215BFA3D1C36E4936AAF9AE5519DC0
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ] 
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : QE13MB
Boot Ok!


Brand     : Xiaomi
ProdName  : rolex
ProdModel : Redmi 4A
Device    : rolex
AndroidVer: 7.1.2
Manufact. : Xiaomi
QLMxCPU   : MSM8937

DevInfo : MSM8937__Xiaomi__Xiaomi__ANDR_v7.1.2__Redmi_4A__rolex__rolex

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : lksecapp.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cust.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8917 / eMMC
Firmware Size : 2889 MiB

Done!
Elapsed: 00:05:29

Reconnect Power/Cable!