Восстановление Aсer S200.

[fakel2]

Сообщение от Sedy

Есть хоть возможность считать фулл с живого и мертвого тела?

С мёртвого фулл слить могу, а вот с живого не получается:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.29
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.

Сокрость подбирал - всё тоже самое. Правда в рабочем теле стоит флэшка Samsung.

Логи с исправного тела:

Analize JTAG Chain:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.29
Selected Resurrector: [HTC Desire]

Connecting to the target...OK
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK

Following devices are found on the JTAG chain:
  Device on TAP #0: ID = 0x202400E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits

Connect & Get ID:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.29
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK
Model selected: HTC - HTC Desire

Detected dead body ID: 0x202400E1

Reset the Target:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.29
Selected Resurrector: [HTC Desire]

Resetting target...OK
STATUS: Target was already halted.

  R0 = 0x00015B1B    R6 = 0xC5C00100    R12 = 0xFFFFFF38
  R1 = 0x00000100    R7 = 0x00000001    R13 = 0x01579C28
  R2 = 0x00000000    R8 = 0x00000000    R14 = 0x005242A3
  R3 = 0x00000000    R9 = 0x00000000    R15 = 0x006FCDA4
  R4 = 0x00000000   R10 = 0x00000000   CPSR = 0x20000010
  R5 = 0x00000006   R11 = 0x00000000

P.S. Прошу дать возможность скачивать вложения, т.к. я даже собственные вложения не могу открыть.