BB5 Easy Service Tool обсуждение, обмен опытом

[gaz2402]

Добрый день уважаемые форумчане!
Хотел поделитса с вами замеченым багом в версий софта 1.65.
даю логи, думаю обьяснять ненужно будет, тело пришло на разлок....
v1.65

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia 306
Software ver : V 03.81 05-11-12 RM-767 (c) Nokia            
IMEI    :      354576058754137
XappVer :      00000672
PPM     :      V 03.81 05-11-12 RM-767 (c) Nokia             I
CNT     :      Content: i_059L7T1 V 03.81 05-11-12 RM-767 (c) Nokia            
Product SN   :     8254015BI
Product code :     059Q411
Base Prd.code:     059G0N8
Module code  :     0204887
Long Prod.SN :     0
Hardware info=======
HWID  : 2001
Batery: 3883 mV
CMT BT: 19e2-4702D14
LCDVer: TPO
Lock info ===========
IMEI       : 354576058754137
IMEI spNet : 3A 45 75 06 85 57 14 03 
IMEI svNet : 33 45 75 06 85 57 14 33 F9 

Conf key     : 8181000801000000
Provider key : 0010000001FFFFFF
Country      : Test SIM (Open)
Operator     : Unknown
Counters     : Key 0  [3] , Fbus 0  [10]
Blocks       : 0
=============================
LOCKS :  Damaged! 
=============================
CRT308 Backup Created

SDD key status : Damaged!!!!!
CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version : 
PA_SL3 phone ,  SP_CODE_LEN : 15

User Code : 12345
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Phone Imei: 354576058754137
Checking locks...
Conf key     : 8181000801000000
Provider key : 0010000001FFFFFF
Country      : Test SIM (Open)
Operator     : Unknown
Counters     : Key 0  [3] , Fbus 0  [10]
Blocks       : 0
=============================
LOCKS :  Damaged! 
=============================
PA_SL3 (15 digit) phone detected...

 - >  Power Off phone, dissconnect it and connect

Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : Verify Error :(
->  Error answer from BootRom

Fetching failed!

Connect phone on selected interface...

UFSx error, reconnect and try again...
Error...!

Connect phone on selected interface...

v1.63

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    Nokia 306
Software ver : V 03.81 05-11-12 RM-767 (c) Nokia            
IMEI    :      354576058754137
PPM     :      V 03.81 05-11-12 RM-767 (c) Nokia             I
CNT     :      Content: i_059L7T1 V 03.81 05-11-12 RM-767 (c) Nokia            
Product SN   :     8254015BI
Product code :     059Q411
Base Prd.code:     059G0N8
Module code  :     0204887
Long Prod.SN :     0
Hardware info=======
HWID  : 2001
Batery: 3888 mV
CMT BT: 19e2-4702D14
LCDVer: TPO
Lock info ===========
IMEI       : 354576058754137
IMEI spNet : 3A 45 75 06 85 57 14 03 
IMEI svNet : 33 45 75 06 85 57 14 33 F9 

Sl Conf  : 268-06-00000000000
Sl Prof  : 800000000003000-B
Sl Aux   : 000B0000
Hw Sig   : 3B624BBC26B6B23E
Country      : Portugal
Operator     : TMN

Lock info:
Block 1
L1:Close;  

CRT308 Backup Created

INFINEON : SuperDongle not exist (It is Ok)
CMLA Key status : Ok
SimLock status : Ok
Security status : Ok
PA_SimLock Version : 
PA_SL3 phone ,  SP_CODE_LEN : 15

User Code : 12345
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!

Phone Imei: 354576058754137
Checking locks...
Sl Conf  : 268-06-00000000000
Sl Prof  : 800000000003000-B
Sl Aux   : 000B0000
Hw Sig   : 3B624BBC26B6B23E
Country      : Portugal
Operator     : TMN

Lock info:
Block 1
L1:Close;  

Check communication with phone....
Communication verify done... Preparing...
Reboot....
Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd : Custom
2nd boot Ok, 01
2nd ready, AA
Sending Algo
ALG : Custom
Algo sent Ok
BL : Quantum_Bootloader_2.5_M1S1
Boot done!
Check RSA procedure disabled by user setting...
Create Log file for local calculation...
File D:\BEST\Local_calc\354576058754137.bcl created - Ok
File D:\BEST\Local_calc\oclHashcat_354576058754137_32.bat created - Ok
File D:\BEST\Local_calc\oclHashcat_354576058754137_64.bat created - Ok
Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Phone disconected!

Connect phone on selected interface...

просьба к разработчикам поправить, ато частенько приходитса откатывать прогу на ранний версий.