X2 Dual Sim,RM-1013 только вибро.

[Fluderator]

После прогрева флеш,лог BEST.

Core : v2.16 , NXP FlashEngine : v5.0

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : rm1013_2.1.0.12_059V780_001_rawprogram_unsparse_ui.xml
Ok, Set : rm1013_2.1.0.12_user_prog_emmc_firehose_8x10.mbn


Dead Mode is Selected
1. Phone should be Off!
2. Press and hold 'Volume Down' button
3. Insert USB cable and hold button, until phone will be detected


Handshake Ok
Init[0] : 0x01000000
Init[1] : 0x30000000
Sending Loader ... 
Init Loader ... 
FireHose Initialized
Device Init Ok
Target VER : 1
Target CPU : 8x10
Target FLN : eMMC
Target CNF : 1000/C000/1000
Target DBG : logbuf@0xF8021118 fh@0xF801DF80

Files in Chain : 67
Flashing now

Flashing : rm1013_2.1.0.12_user_NON-HLOS.bin
ProgInit : start 16384, num 75203
Flash Error , No ACK message! Check Battery charge , Cable

Chain finished, All files flashed!

Rebooting phone now

Flashing done!
Total flash time : 00:01:17

Connect phone on selected interface...

Доходит до выделенного и висит пока не выдернешь шнур,точно флеш сдохла?