Успешное применение, без комментариев [CM2MTK MediaTek]

[deezee]

Card found : S/N : 5460XXXX , v0130
Chinese Miracle II  [MTK module] v 1.45

Operation : Check / Read Info [ v1.45 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513758534142013775E62612DF
Initialize Memory ... 
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BASX7
[eMMC] : FLASH_CID : 150100513758534142013775E62612DF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 79311FC15B232CDAC27C2C4F957F2D1D
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : ZTE
ProdName  : P182A20
ProdModel : ZTE Blade L3
Device    : P182A20
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : LIF_BR_B18D7_P182A20V1.0.0B03

SECURITY : 
IMEI_SW [1] : 86625402190xxxx
IMEI_SW [2] : 86625402191xxxx
BTMAC Addr  : D437D70378E4
WiFi MAC    : A8A668E5AEC5

MODEM : 
BaseBand  : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V62_P6_1_wg_n

EXTRA : 
LCD [0] : hx8394a_hd720_dsi_vdo_s517
LCD Res : 1280x720
TOUCH [0] : GT915_HD
CAM [0] : gc2355_raw
CAM [1] : ov2680_mipi_raw
CAM [2] : ov5670_mipi_raw
CAM [3] : ov5648_mipi_raw
CAM [4] : gc5004_mipi_raw
CAM [5] : a5142_mipi_raw
CAM [6] : a5143_mipi_raw
MODEM : s517_band_18_hspa_ly
LOCALE : ru_RU en_US cs_CZ da_DK de_AT de_CH de_DE el_GR en_AU en_GB es_ES es_US fi_FI fr_CH fr_FR hu_HU it_IT lt_LT lv_LV nl_NL nb_NO pl_PL pt_BR pt_PT sv_SE zh_CN zh_TW uk_UA

Done!
Elapsed: 00:00:09
Reconnect Power/Cable!


Operation : SP Unlock [ v1.45 ]
Mode : Direct Unlock

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 150100513758534142013775E62612DF
Initialize Memory ... 
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BASX7
[eMMC] : FLASH_CID : 150100513758534142013775E62612DF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 79311FC15B232CDAC27C2C4F957F2D1D
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


SIM Lock Status : Locked!
Unlocking now ... 
Unlock done!

Done!
Elapsed: 00:00:35
Reconnect Power/Cable!