Успешное применение [CM2QLM Qualcomm]

[gulka]

Версия 1.02 справилассь с BQ HIGHway

Operation : Read Flash [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8909]
ID_BLOCK_S : 039ABAFB
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 49C762F6FE52E492
ID_BLOCK_L : 9B939302A85331CC
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8909 , FLASH : eMMC , VER : 1
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!


Brand     : BQ
ProdName  : BQS_5025
ProdModel : BQS-5025
Device    : BQS_5025
AndroidVer: 6.0.1
Manufact. : BQ
QLMxCPU   : MSM8909
QLMxPRJ   : BQS_5025_HighWay_20160513_V7

DevInfo : MSM8909__BQ__BQ__ANDR_v6.0.1__BQS-5025__BQS_5025__BQS_5025__BQS_5025_HighWay_20160513_V7

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : splash.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : sensor.bin
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 1450 MiB

Done!
Elapsed: 00:04:44

Reconnect Power/Cable!

И плюс несколько раз эта ошибка мозг выносила