Успешное применение, без комментариев [CM2MTK MediaTek]

[gulka]

Iphone 6S [MediaTek] MT6250 Прошивка

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 25 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0000
BB_CPU_SN : BB0D9ADDBAD5F98700E4C73FF13B0764
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : C200 2500 3800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EF , [MXIC] MX25U12835FZNI_10G
[0] : FLASH_DIE : 00C2 0025 0038 0000 
[0] : FLASH_LEN : 0x01000000
INT_RAM : 0x0000D400
EXT_RAM : 0x00800000
Reading Flash Content now ... 

Read Flash now
Read Ok , 16777216 bytes read
Check and collect compile info
File_Info   : MAUI_KHAN50V11_12864_11B_PCB01_gprs_MT6250_S00.R5027D_18L_ZB_V02.bin
FileVersion : R5027D_18L_ZB_V02

[ScatCFG] : MT6250 / R5027D_18L_ZB_V02 / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\MAUI_KHAN50V11_12864_11B_PCB01_gprs_MT6250_S00\

Done!
Elapsed: 00:00:55
Reconnect Power/Cable!