Ошибки и обсуждение [CM2QLM Qualcomm]

[yurii-62]

Сообщение от JayDi

В теории должен работать.

Все Ок. Спасибо...

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8952]
ID_BLOCK_S : 01221F0E
ID_BLOCK_I : 009720E1
ID_BLOCK_E : 00000004
ID_BLOCK_L : EF47CEFED214CB8C92A2A8DAF89C016B
ID_BLOCK_L : A95B825AF7F233D2DBF2235B1C0FE336
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8952 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:24

Reconnect Power/Cable!

Read FW

Operation : Reset Settings [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8952]
ID_BLOCK_S : 01221F0E
ID_BLOCK_I : 009720E1
ID_BLOCK_E : 00000004
ID_BLOCK_L : EF47CEFED214CB8C92A2A8DAF89C016B
ID_BLOCK_L : A95B825AF7F233D2DBF2235B1C0FE336
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8952 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:24

Reconnect Power/Cable!

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 652 [MSM8952]
ID_BLOCK_S : 01221F0E
ID_BLOCK_I : 009720E1
ID_BLOCK_E : 00000004
ID_BLOCK_L : EF47CEFED214CB8C92A2A8DAF89C016B
ID_BLOCK_L : A95B825AF7F233D2DBF2235B1C0FE336
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8952 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand     : ZTE
ProdName  : P852A11
ProdModel : ZTE B2017G
Device    : msm8952_64
AndroidVer: 6.0.1
Manufact. : ZTE
QLMxCPU   : MSM8952

DevInfo : MSM8952__ZTE__ZTE__ANDR_v6.0.1__ZTE_B2017G__msm8952_64__P852A11

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : mdtp.img
[Read Ok] : cmnlib.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8952 / eMMC
Firmware Size : 3504 MiB

Done!
Elapsed: 00:09:28

Reconnect Power/Cable!