Успешное применение, без комментариев [CM2MTK MediaTek]

[uploads]

Alcatel 9007X

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 210 [MSM8x09]
ID_BLOCK_S : 04AAAA50
ID_BLOCK_E : 00420011
ID_BLOCK_L : FBC6975C8077347E8D727219C4FE21E3
ID_BLOCK_L : F67FEB21B79A0DF9083D86DE1E3B5F07
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ] 
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!


Brand     : TCL
ProdName  : 9007X
ProdModel : 9007X
Device    : pixi37
AndroidVer: 5.1.1
Manufact. : TCL
QLMxCPU   : MSM8909

DevInfo : MSM8909__TCL__TCL__ANDR_v5.1.1__9007X__pixi37__9007X

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : nvram.img
[Read Ok] : perso.img
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : secro.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : splash.img
[Read Ok] : tctperso.img
[Read Ok] : cache.img
[Read Ok] : misc.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 2408 MiB

Done!
Elapsed: 00:08:33

Reconnect Power/Cable!

[gulka]

samsung A70 Firmware Прошивка

Operation : Read Firmware [ v2.07 ]

Operation : Read Firmware [ v2.07 ]

ExtSparse : Enabled
ForceRead : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM64)
MODE : PRELOADER PORT
PORT : 64
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1944 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6570
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00018000 [ 96,00 KB ]
DRAM: 0x40000000 [ 1,00 GB ]

EMMC: 1501004B355530304D02918B317650DF
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : K5U00M
EMMC:
BOOT1 : 0x00200000 [ 2,00 MB ]
BOOT2 : 0x00200000 [ 2,00 MB ]
RPMB : 0x00020000 [ 128,00 KB ]
USER : 0xE9000000 [ 3,64 GB ]

CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : B4C50F2381B0FFCFFC0DED09FF6F9198

DA : USB : HIGH-SPEED

Boot done!

Patch Level : MRA58K
Display ID : MRA58K test-keys
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-03-05
Build Time : 1572064678
Product Model : A70
Product Brand : welcome
Product Name : A70
Product Device : A70
Product Manfct : welcome
Board Platform : mt6570
Product Info : A70

MT6570__welcome__A70__6.0__MRA58K__A70

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : md1rom.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 9%
Read : cache.img
Read : userdata.img

FW Size : 1,70 GB
Android Info saved : _Android_info.txt
Scatter : MT6570_Android_scatter.txt
Saved to : C:\Users\irchi10\Desktop\MT6570__welcome__A70__6.0 __MRA58K__A70\

Done!
Elapsed: 00:05:34

[XURSAND]

HOMTOM S99 Format Ok : RESET PROTECTION

Operation : Identify [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 880103534C4436344720C9461A57B521
        EMMC: VEN : FORESEE | OEM : 301 | DEV : SLD64G
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0xE67800000 [ 57,62 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6B1282562BB624B64F4B7B8C8E51BDBF

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O00623
Display ID     : HOMTOM-HTS99-Android_8.0-R12-20181012
Ver. CodeName  : REL
Ver. Release   : 8.0.0
Sec. Patch     : 2018-10-05
Build Time     : 1539249572
Product Model  : S99
Product Brand  : HOMTOM
Product Name   : S99
Product Device : S99
Product Board  : S590AD
Product Manfct : HOMTOM
Product Info   : S99
Product Board  : k50v1_64
Board Platform : mt6750
Build Time     : 1539249572
Ver. Release   : 8.0.0

USERDATA : ENCRYPTED 

IMEI[0] : 3590880903xxxxx
IMEI[1] : 3590880903xxxxx
NVRAM check : Passed!

Done!
Elapsed: 00:00:42

Operation : Reset Settings/Format FS [ v2.06 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ... 
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256,00 KB ]
        DRAM: 0xC0000000 [ 3,00 GB ]

        EMMC: 880103534C4436344720C9461A57B521
        EMMC: VEN : FORESEE | OEM : 301 | DEV : SLD64G
        EMMC: 
              BOOT1  : 0x00400000 [ 4,00 MB ]
              BOOT2  : 0x00400000 [ 4,00 MB ]
              RPMB   : 0x00400000 [ 4,00 MB ]
              USER   : 0xE67800000 [ 57,62 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 6B1282562BB624B64F4B7B8C8E51BDBF

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION
Format Ok : PRIVACY

Done!
Elapsed: 00:00:25

Reconnect Power/Cable!