Infinity-Box Chinese Miracle 2 : Новости и обновления ПО для RKT

[fedja]

Chinese Miracle-2 RKT/RockChip v1.00 - RockChip Service Module started

Supported CPU types:
Rockchip RK3026 NAND
Rockchip RK3026 eMMC
Rockchip RK3066 NAND
Rockchip RK3066 eMMC
Rockchip RK3188 eMMC

Supported operations:

- Read Info
Allow read full tablet info

- Read Full Firmware
Read Firmware only (like-factory)
- Write Full Firmware
Write firmware only
Firmware Read allow read complete, but very compact firmware, which enough repair even completely erased device!
Firmware Flashing allow write FW in device with any SW state (until it can enter in boot mode - HW part is alive)
Firmware Flashing allow write FW with keep UserData untouched

- Format FS/Reset Settings
Allow wipe/reset device to factory state
No ADB/USB Debug/Root etc. required

- Read PatternLock
Allow read PatternLock sequence
No ADB/USB Debug/Root etc. required

All operations supported for NAND and eMMC tablets !

[ddilshod93]

Infinity-Box Chinese Miracle-2 RKT/RockChip v2.00 - New CPUs, TVbox, Tablets and more!

Support RK29xx series ( NAND )
Support RK30xx series ( NAND, eMMC )
Support RK31xx series ( NAND, eMMC )
Support RK32xx series ( NAND, eMMC )
Support RK33xx series ( NAND, eMMC )

Supported devices : Tablets, TVboxes and IoT devices!

Main:
Core completely rewrittend from scratch
New connection stuck, fixed all connection problems, support latest devices and drivers

Features :
Identify / Read Info
-> Read full device info ( HW details, Android Info )
Reset Settings
-> Reset Settings ( Data and Security settings )
-> Reset UserStorage ( Photo, video and rest content )
-> Reset FRP for Android 5 / Android 6 devices
Flash Read
-> Read Factory-like FW
-> Engine allow auto-detection of different types
Flash Write
-> Write Infinity FW
-> Reset Settings during Flashing
Reset UserLocks ( eMMc Only for now )
-> Reset all userlocks without touching userdata ( Android 4/5/6 devices )
Read PatternLock
-> Allow read PatternLock sequence on Android 4/5 devices

Other
New drivers supported (visit support area to download)
DOC included: Connection hints
DOC included: eMMC and DDR support list
Old FW types (made by RKTv1) are NOT supported !
-> Workaround: Write with v1 and then read with v2 again

[chekm]

кнопка Reboot /Set Normal
включенное устройство в режим прошивки не перегружает
пользуюсь RKBatchTool_v1.7

[SurTaX]

Infinity-Box Chinese Miracle-2 RKT/RockChip v2.01 - Factory IMG flashing and more

- Main
Activated Factory UIMG files support
- > Flash Factory UIMG Files
- > Read Complete Info from UIMG files
- > Verify Factory UIMG files content

Activated DEVICE MODE verification
- > There is 3 mode can be found:
1. Loader Open
2. MaskROM
3. Loader Protected
PROTECTED mode limitations: WRITE PROTECTED ( you can ONLY read fw, patternlock, identify )

- Service
Activated CPU/HW details info reading
Improved NAND support
Improved "Reset UserLocks"

- Firmware Reader updated
Some missed and new types supported

- Other
Fixed connection problems with some devices
Some improvements and bugfixes

[Mardanov.T]

Infinity Chinese Miracle-2 RKT/Rockchip v2.02 - New chips and latest Android support

As ordinary, unique functions and methods released


Core
BugFix : Connection stack updated
BugFix : Compatibility with latest drivers releases
Changed : Core rebuild for support modern SoC's and old SoC's revisions with Fuse/SecureBoot support

Support RK29xx series ( NAND )
Support RK30xx series ( NAND, eMMC )
Support RK31xx series ( NAND, eMMC )
Support RK32xx series ( NAND, eMMC )
Support RK33xx series ( NAND, eMMC )
Support RKPX5 series ( NAND, eMMC )

Service
Changed : Identify procedure rebuild. Complete info reading and parameters detection
!*If Identify CAN NOT display SWVersion details it may means device can not be serviced for FWRead operations
Changed : FRP reset revised to support latest Android versions and Modern SoCs
Changed : FS format revised to support latest Android versions and Modern SoCs

Firmware flasher
New Feature : Modern RK UnionImage flashing supported
New Feature : Combined Sparse image flashing supported
New Feature : Repartition for RK-PARA and RK-GPT supported
New Feature : Factory (UnionImage) Firmware flashing for latest Rockchip SoCs versions/revisions
Changed : Support Infinity Firmware Flashing ( Old and Modern SoCs revisions )

Firmware Reader
New Feature : Android 7 devices supported
New Feature : Android 8 devices supported
New Feature : Android 9 devices supported
Unique : Firmware read allow read FW from "unreadable" Android 8/9 devices
!*Feature support eMMC and NAND devices which can not be dumped by any tools over native protocol ( No Root / ADB need )
!*Feature support some "slow" NAND cases on modern SoC's
!*Feature may not work on some NAND devices with FTL/ECC errors and Flash Faults
Changed : Improved structure identification
Changed : Support more different types

Other
BugFix : Minor changes and bugfixes
Drivers : New driver package with Win8/Win10 x86/x84 can be found on support area
Info : SW may work not correct in some cases with RK29xx and RK31xx OLD NAND 4.x devices
Info : New driver installation is REQUIRED for correct work !