Новые версии ПО для Infinity Box

[motokmips]

2021-04-28 Infinity Chinese Miracle-2 MTK/MediaTek v2.22 - New models and features

As ordinary, unique functions and methods released

Core
Changed: Protocol updated (for Raphael/Legacy SoC)
Changed: Loader v2112 supported and tested
Changed: MediaTek MT6757 support revised
Changed: StandAlone SLA now activated in automatic mode for phones that need it
Changed: Driver dependency is not important any more, it gives more flexibility and more stable operations
Changed: EMI DB updated, BootHelper updated
NewChip:: MT3561/MT3561S supported (CardHeadUnit)

Flasher
Changed: Core updated for RAPHAEL SoC line
Changed: UltraFlash engine updated

MemoryTool
Changed: Long-range reading (over 32+ GB) optimized ( in most cases for Forensic cases )
Changed: LEGACY support revised

Service
Changed: SmartReset function process updated
Changed: New SmartReset mode activated - SmartReset Extra
! SmartReset Extra acts like ordinary ones but makes additional operations for specific brands:
- Reset MiAcc for Xiaomi ( non-permanent )
- Reset FlyMe acc for Meizu
! Other vendor-specific scripts can be included by users requests
Feature: "Restore Backup" option activated ( see Security tab )
! Automatic restore backup for connected device if this backup was already created earlier by Identify, Settings -> Autobackup option

Firmware Reader
Changed: Android 11 specific changes
Changed: Brand-specific changes and fixes
Changed: Better sparse handling
Changed: New types supported
Changed: Internal Database updated

Model DB
Changed: Changed acting model to semi-auto
! In most cases it is enough just to select required operation and connect devices ( BROM mode preferable )
! In some situations it may need to select older BASE DA for older SoCs ( LEGACY ones, since they are outdated )
Changed: New DA base v2112 included

Other
Changed: Number of small changes and fixes
Changed: Some unused options and checkboxes has been removed as deprecated, UI become easier


Here is virustotal report for people who care about safety. Be sure you do not use low quality antivirus tools - first 6 lines in given list gives false alert!
Пароль на архив 12345678

[qwer2010]

Infinity Chinese Miracle-2 MTK/MediaTek v2.28 - MT6877, MT6893, Repair Security and more

As ordinary, unique functions and methods released

Core
Changed: Protocol updated for Raphael / Legacy platforms
NewSOC : MT6877 supported - any security state - SLA, DAA, Plain
NewSOC : MT6893 supported - any security state - SLA, DAA, Plain
Changed: FireFly / Infinity DA (Download Agents) updated
Changed: NVRAM manager has been rebuild from scratch
For now it covers all Old and Modern devices for Identify and Repair operations in FlashMode!

FireFly - Universal DA (Download Agent) that was created by Infinity Team to reach new service level and gives features

FireFly: NewSOC : MT6739
FireFly: NewSOC : MT6761
FireFly: NewSOC : MT6763
FireFly: New operations supported:
Repair Security for Generic, Vivo and all other non-signed cases
Read / Write NVRAM
Restore Backup

Current list of supported SoC:
MT6739
MT6761
MT6763
MT6765
MT6768
MT6771

Supported operations:
Identify: Device Info ( Android ), HWInfo with Full eMMC and EOL info
Format FS: Smart Reset, Extra and all other mode are supported
MemoryTool: Allow execute ALL supported MemoryTool functions
BootLoader Unlock: Allow Unlock device Bootloader - WITHOUT touching UserData
Repair Security for Generic, Vivo and all other non-signed cases
Read / Write NVRAM
Restore Backup

Flasher
Changed: UltraFlash engine updated and also any limitations has been removed
Changed: Flash engine updated

Firmware Reader
Changed: New types supported
Changed: Internal Database updated
Changed: MT6877 support
Changed: MT6893 support
Changed: Fake "Samsung" devices processing fixed

Service
Changed: "SmartReset" updated
Changed: "SmartReset Extra" updated
Changed: "Identify" operation now show more security info
Changed: "Identify" operation now show modem info/version
Changed: New NVRAM engine/tools
! Read device security now works with Legacy (Old/New) and Raphael (Old/New) lines
! Rebuild check/verify procedures for modern devices
! Repair Security now works in flash mode for Raphael line too ( support most UNSIGNED types - Generic, Huawei, Vivo, Nokia etc. )
! Repair security NOT work with vendor-signed devices ( you will get info about device not supported during operation )
! Signed/Generic mode detection improved
Changed: Restore Backup operation has been updated
Changed: NVRAM read and write operations has been updated

Memorytool
Changed: FireFly mode support updated

Other
Changed: Many different general changes and fixes applied
Feature: Feedback - BugReporting/DebugData collection module enabled. Feedback can be enabled/disabled during installation.
! Feedback feature made for fast, automatic reporting to team about new/unsupported devices in different operations without any additional need of actions from user side.
! That will allow bring server-side updates faster and make updates for new and unsupported phones, if need, every day!

Пароль:12345678

[Ulugbek]

Dongle Manager 1.90

[*] UI changes
[+] Access to download server and account

[Ulugbek]

Dongle Manager 1.91

v1.91
[+] Account Reset function
[*] UI changes

[DB2020_Logs]

Infinity Chinese Miracle-2 CM2MT2 v2.38 - general improvements and fixes

ATTENTION:
In some cases CM2MT2 v2.38c8 may gives an issue: software questions may be answered Yes by default without waiting for your answer.
Please download and install CM2MT2 v2.38c9

!!! WARNING !!!
Backup files storage structure changed, files and folders will be compressed. Here is backup files structure
Software will convert files and folders at first run!
If you have important data - make /backup/ folder copy for emergency case!
Process may takes time, BE PATIENT!

- Startup process revised
- Backup files are packed, zip and 7z formats are supported (7z.dll is required)
- Backup files default format is 7z
- Backup|Restore partitions list updated
- Backup overwrite request for "Identify" only, skip existing backup replacement for other operations
- Partition size verification during backup
- File content verification (zeroes) during backup creation
- File content verification (zeroes) during backup restore
- Display hw|sw info to log during backup file selection
- Restore backup images with .bin and .img extensions
- Legacy settings values removed
- MemTool work path save|restore
- MemTool window position save|restore
- MemTool ui changes
- Log window style customization
- HW Report behaviour changed depends on selected Platform
- Cloud: display hw|sw info about last connected device
- Cloud: get previously stored backup file
- Flash chip vendors list updated
- ufs parser revised
- emmc parser revised
- emmc failure detection improved
- nand parser revised
- Firmware read/write last selected path save|restore
- scatter file creation process rebuilded
- scatter file load process revised
- META mode connection method revised
- META mode info and device version output revised
- META mode memory leak fixed
- Check free disk space on startup
- Check free disk space on Flash Read
- Flash Read file selection method updated
- Flash Read process termination revised
- Backup before Reset in META mode
- Backup before Reset in Flash mode
- extcsd backup file content verification
- PMT (partition table) info output slightly changed
- PMT (partition table) info included to device.txt during backup
- Store device.txt with hardware and software info to backup
- Store device.txt with hardware and software info to firmware
- Store device.txt file as ini
- Store loaders config to device.txt file
- Verify backup presence before process
- Error messages and software hints updated
- More software hints for [Format] operations
- More messages in log about process flow
- [SMART RESET EXTRA] error handling revised to recover after error
- Create Screenshot [Snap] as .png instead of .bmp (quite compact)
- Device brand|model detection revised
- Updates checker rebuilded
- External update checker disabled
- External firmware uploader enabled
- [Stop] process revised
- Customs Settings -> EMI button extract prevoader from partition image on load
- MemTool selection mode for 128 Mb and 256 Mb in list
- MemTool file selection revised
- MemTool operations revised
- [Flash] page minor ui changes
- [Security] page minor ui changes
- [NVRAM Read] operation revised
- [NVRAM Write] operation revised
- NVRAM backup file format changed
- [Restore Backup] operation allow to select backup file
- [Restore Backup] has new restore mode [+preloader]
- Check free disk space before backup
- settings.ini new value [where] backup=backup\
- settings.ini new value [where] boot=boot\
- settings.ini new value [where] tools=..\tools\
- settings.ini new value [where] firmware=firmware\
- SC engine revised
- Files verification config option in [Settings] page
- Files verification for nvram backup enabled
- Memory management engine revised
- [KG] moved to [Misc] section
- Dialogs texts revised. Message text will be visible in log window on selection
- Minor log text messages and ui changes
- Check required dll's on startup
- ssleay32.dll included to installer to improve compatibility
- 7z.dll included to installer
- /tools/iosFileUploader included to installer
- Required Dongle firmware version: 0153

Download

[DB2020_Logs]

Infinity #CM2MT2 boot-pack v2.40 with updated loaders

Loaders & structure updated

[+] Condor
[+] Dlight
[+] Xiaomi/Redmi-9c/ linked to base-2112 + preloader file from /Redmi-9/
[+] Xiaomi/Redmi-9a/ updated with preloader file from /Redmi-9/
[+] legacy loaders moved to /0_rare/
[+] /0_base/v17xx/ moved to boot-pack
[+] /0_base/v18xx/ moved to boot-pack
[+] /0_base/v19xx/ moved to boot-pack
[+] /0_base/v20xx/ moved to boot-pack

CM2MT2 v2.39 and higher should be used with the next loaders:
[+] Infinix/Infinix-G99-General/
[+] Infinix/Dimensity-9000/
[+] Infinix/X676B/
[+] Tecno/Tecno-G99-General/
[+] Tecno/Dimensity-9000/
[+] Tecno/Phantom-X2-X2Pro/
[+] /0_generic/ loaders for latest MT6781/MT6789/MT6983 are inside sw installer

Every new boot-pack release has all previous boot-packs included, it means you should only install latest one to get all loaders

Download HERE

[DB2020_Logs]

Infinity Chinese Miracle-2 #CM2MT2 v2.41

General:
- FireFly core loader updated: /XFireFly/base/FireFly_AllInOne_DA.bin
- FireFly mode operations updated such as bootloader unlock etc.
- Many internal changes

Image management:
- Preloader parser/converter updated
- Preloader/EMI open dialog updated for bin/img files
- DA, Cert, Auth, Preloader load/verification method updated

User Interface:
- log management engine updated
- software messages revised


Discussion and download links are HERE

[DB2020_Logs]

Infinity Chinese Miracle-2 #CM2MT2 v2.42

General:
- Maintenance release
- Memory management improved
- Many internal changes
- Boot time flow process updated
- Boot time error handling improved

User Interface:
- flash chip info output revised
- software messages & hints updated


Discussion and download links are HERE

[DB2020_Logs]

Infinity #CM2MT2 v2.45

- startup process and external dll's handling method revised to avoid 0x0c000007b issue with damaged libusb installation
- boot process revised
- boot/sla error handling method changed
- flash read process revised: luci handling updated and more detailed output
- EMI database structure updated
- MemoryTool file path handling updated, non-existent path check
- external dll's moved to /lib/
- external dll's verification method updated
- separate fscard.ini file is not required any more
- strategy detector updated: honor
- "Restore backup" process revised, issue with filelist fixed
- flash writer display source file size instead of partition size
- flash reader: [Create SCAT] option
- gui resize bug fixed
- auto-update check method changed to once per day
- messages and hints updated
- minor ui changes
- many internal changes and improvements

NOTE: install latest CM2MT2 boot-pack for best results


DOWNLOAD

[DB2020_Logs]

Infinity #CM2MT2 v2.51

NOTE 1: Many new methods are being applied to the latest models. Consider to install this version to new directory and in case of any issue with old models use previously released software version for it.
NOTE 2: #CM2MT2 v2.51r1 has fixed gui issue with security values selection

CPU/Platforms:
LUCI: Protocol updated
LUCI: Vendor-specific changes
LUCI: RAMless support activated - RAMless DA must be used, automatic detection
LUCI: New SOC: MT6835 support activated
LUCI: New SOC: MT6985 support activated
More brands are covered in this update: Realme, Oppo, Tecno, Infinix, Lenovo, Moto

General changes:
- New loaders and boot method for Tecno/Infinix (without test point)
- New loaders and boot method for Vivo [luci] (without test point)
- New loaders and boot method for Realme [luci] (without test point)
- New loaders and boot method for Oppo [luci] (without test point)
- New loaders generic models base_v2316
- Loaders config for xioami updated
- Loaders storage tree updated to make easier selection
- Boot procedure updated
- Legacy devices (MT6580 and similar) connection process revised
- Supported CPU list updated: MT6835, MT6985
- MemoryTool filesystem detection method updated
- MemoryTool|RawTool updated
- MemoryTool messages updated
- MDM operations updated
- Device info parser updated
- Firmware analyzer updated
- EMMC hardware fault detection improved
- Server firmware verification method updated
- Startup Logs Analyzer added to [HW|SW reports]
- Format/Reset mode selection method changed, all operations rebuilded
- [Probe rpmb] option for [Identify]
- Filesystem(s) detection method updated
- gui changes
- Many internal changes and optimization applied

https://infinity-box.com/?r=58
https://infinity-box.com/?r=59

[DB2020_Logs]

Infinity #CM2SP3 v2.24 released - [MMC EOL Reset], RPMB read and more features

[FF] mode:
- [MMC EOL Reset] function to attempt to extend faulty EMMC lifetime
- [RPMB] read function
- [Repartition] option during flashing
- [MemoryTool] read partition table
- [MemoryTool] INIT (write) partition table

- Devices list updated with more models
- Built-in boot pack files updated
- Partition table analyzer updated
- [MDM] Apply/Rollback methods improved
- backup and firmware read/write process updated
- [Service Report] option
- Many internal improvements and fixes

https://infinity-box.com/?r=58