http://rapidshare.com/files/387605789/WINGPLUS35_08B_PCB01_GPRS_MT6235B_S01.W03101Z33M0C2_0T46D0807__firmware_20100430-151148.B4M.bin.html
и зеркало
http://depositfiles.com/files/baevezzmm
вычитывал полный фул
------------------------------------------------
Добавлено позже:
COM4 [Serial2] selected
module v3.13
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.952.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: W03101Z33M0C2.0T46D0807
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: WINGPLUS35_08B_BOOTLOADER_V005_MT6235B_W03101Z33M0C2_0T46D0807.b
nfi area detection finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: WINGPLUS35_08B_PCB01_GPRS_MT6235B_S01.W03101Z33M0C2_0T46D0807.BIN
project-id: W03101Z33M0C2.0T46D0807, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: 2nd [standard] generation
TCL-ID is absent
===> done
====================
New firmware detected (v.3.13, database date: 24.04.2010):
WINGPLUS35_08B_PCB01_GPRS_MT6235B_S01.W03101Z33M0C2_0T46D0807.BIN
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: mt62xx@<available in full version of forum> or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 32Mb
number of areas/bytes to read: 1:02000000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
file saved: D:\Firmware\Китай\i-mobile 630\WINGPLUS35_08B_PCB01_GPRS_MT6235B_S01.W03101Z33M0C2_0T46D0807__firmware_20100430-151148.B4M.bin
Disconnect...
done
Finished, time used: 11 min 29 sec
Remove/Install battery now !