Ultimate Unlocker - Восстановление GDFS/EROM/SEMCBOOT/SECZONE в телефонах A2, DB2020, DB2012 без использования TP

[Андрей Мар]

Купил сегодня кредит. Один K790 восстановил без проблем.
Лежал еще один телефончик, K800,
который погиб при попытке разблокировать его как K790.
CID был 52.
Стал включаться с белым экраном и зависать на этом.

Лог D-Ultimate Unloker:

Выбираю Direct Unlock (+Sec.zone rebuild), галку на Repair EROM/SEMC Boot.
Set certificate to: Brown CID 49.

  05:22:48  D-Ultimate Unlocker v3.07 by Cruiser Team
  05:22:48  - Fast & Full - Unlock, Relock, Show codes, Sec.zone rebuild, EROM repair, CID change
  05:22:48  Initializing...
! 05:22:48  1. Please see the documentation first (the tab 'Info' or attached .pdf file)
! 05:22:48  2. Choose the phone model
! 05:22:48  3. Select the desired options
! 05:22:48  4. Please connect the phone either via USB while holding 2-5…
! 05:22:48  - or via a serial cable and double-click on it in the device list
  05:27:21  Selected phone: K800
  05:27:21  Connecting via Generic EMP USB Flash Device (USB2)…
  05:27:21  Device driver version: 2.2.0.0
  05:27:21  Device driver date: 9-18-2008
  05:27:22  Connecting to the baseband CPU...
  05:27:22  Entering baseband CPU service mode...
  05:27:22  Detected chipset: DB2020
  05:27:22  Boot mode: ROM
  05:27:22  Sending loader...
  05:27:22  IMEI: 35170701913234
  05:27:22  OTP CID: 49
  05:27:22  Effective CID: 49
  05:27:24  Please reconnect the phone (disconnect, connect while holding 2-5)
  05:27:30  Sending loader...
  05:27:31  Communicating with server…
! 05:27:39  News: Your credit consumption policy: Level 1 (Novice)
  05:27:40  Remainig credit (supreme): 0.34
  05:27:44  Remainig credit (supreme): 0.34
  05:27:47  Please reconnect the phone (disconnect, connect while holding 2-5)
  05:28:15  Sending loader...
  05:28:17  Turning off the phone...
  05:28:19  Done.

Далее перехожу на Setool:

Записываю GDFS and EROM:

Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:49 PAF:1 IMEI:35170701913234 CERT:N/A
FLASH CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
Flash ID check:897E
Flash props sent ok
writing "C:\Program Files\Setool\gdfs_in_ssw_format\db2020\K800_GDFS_S SW.ssw"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is:640
Will flash 32 blocks...
SSW loading returns:0
Setting up GDFS...
OTP WRITE NOT EXECUTED
WRITING CLEAR SIMLOCK UNITS...
ALL UNLOCK/LOCK CODES SET TO "26024436"
SIGNING...
Elapsed: 43 secs.


Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:49 PAF:1 IMEI:35170701913234 CERT:N/A
FLASH CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
Flash ID check:897E
Flash props sent ok
writing "C:\Program Files\Setool\eroms\db2020\DB2020EROM_CNV_RED52_BRO WN_CID49_DB2020.ssw"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is:40
Will flash 2 blocks...
SSW loading returns:0
Setting up GDFS...
OTP WRITE NOT EXECUTED
WRITING CLEAR SIMLOCK UNITS...
ALL UNLOCK/LOCK CODES SET TO "60402487"
SIGNING...
Elapsed: 11 secs.

Аппарат не включается.

Далее прошиваю его SEtoolом:

SIGNED MODE (USING SERVER)
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:49 PAF:1 IMEI:35170701913234 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing "C:\Документы\Сотовые телефоны\SONY ERICSSON\K800\Прошивки\Под Setool\CID52\R1JG001_1250210_GENERIC_WI.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is:9200
Will flash 460 blocks...
SSW loading returns:0
writing "C:\Документы\Сотовые телефоны\SONY ERICSSON\K800\Прошивки\Под Setool\CID52\R1JG001_FS_BALTIC_WI_RED_CID52.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is:4420
Will flash 221 blocks...
SSW loading returns:0
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader startup: executed
loader GDFS startup: executed
wrong response, break.
loader fs startup failed, that is fatal
Elapsed: 954 secs.

И как и вначале включается с белым экраном, и на этом зависает.

Что я неправильно делаю?