mx-key и 7210 contact service

[gulka]

эта надпись вообще не появляется

Написал ведь: вместе с надписью через 6-7 минут

[arusssss]

толку нет ждал и 20 мин

[jblack]

Сообщение от arusssss

толку нет ждал и 20 мин

А для чего интересно нажимать кнопку "repair sd" если в логе с ним все в порядке.

SUPERDONGLE_KEY seems to be valid

Был вчера как раз 7210 RM-436 с таким же симптомом:

SIMLOCK invalid!
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST failed!
SECURITY_TEST failed!

Восстановил следующим образом:

Service > IMEI & Security > Simlock ставим галочку Repair SIMLOCK и давим кнопку "Repair SpLock" ждем завершения и получаем:

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed

Далее идем Service > IMEI & Security > IMEI rebuild и пишем RPL без NPC от такой же модели телефона, теперь переходим в
Service > PM делаем "SUPER SD Auth" и пишем рабочий PM без 308 поля, в итоге видим заветное:

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST passed

[dron-1307]

Доброго дня !!!!!
...есть 5530 ( не включается )
шьется без проблем ....

SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!

... сделал следующее при помощи MX-box

Далее идем Service > IMEI & Security > IMEI rebuild и пишем RPL без NPC от такой же модели телефона, теперь переходим в
Service > PM делаем "SUPER SD Auth" и пишем рабочий PM без 308 поля, в итоге видим заветное:

... проблема осталась

[azis29]

SECURITY_TEST failed!

При такой ошибке зачем RPL залить? Тем более чужой!
Через SX4 PM 1-309 залить достаточно!

[yurii-62]

может не проходить из за сервера МХ,попробуйте повторить...1-309 проливаются?? лог SX4 приложите

[dron-1307]

Detected as PA_SL3 phone.
- Avoid SW Downgrade & manual erase to this phone !
 
SIMLOCK seems to be valid
SUPERDONGLE_KEY seems to be valid
CMLA_KEY seems to be valid
WMDRM_PD seems to be valid
SIMLOCK_TEST passed
SECURITY_TEST failed!
 
 
Imei net: 358307031355297
Version: SIMLOCK SERVER
Counter: 0/3, 0/10
 
CONFIG_DATA: 2440700000000000
PROFILE_BITS: 0000000000000000
 
BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
Scanning local SX4 Card ...
No SX4 Card found.
SERVER->Served by MXKEY - BLADE X at host2, agent version 1.1 revision 0.8

Authenticating using security server ...
Connecting to server[main.mxkey.biz] ...MXKEY SX4CARD - ID, hello 109.225.11.26
Bad phones ack, probably SUPERDONGLE_KEY corrupted !
Wrong response to SD verify request
SERVER->Served by MXKEY - BLADE X at host2, agent version 1.1 revision 0.8

Authenticating using [MX] security server ...
Connecting to server[main.mxkey.biz] ...MXKEY SX4CARD - ID, hello 109.225.11.26
SUPERDONGLE authorized :)!
Writing RFBB data: modules\{3EBAF427-9F55-419F-8A75-385DFC651169}\def\rfbb\5530_RM-504.txt ...
Writing RF settings to phone ...OK, finished. 16 Records found.
Writing BB settings to phone ...OK, finished. 8 Records found.
Done.
SERVER->Served by MXKEY - BLADE X at host2, agent version 1.1 revision 0.8

Updating RFBB data ...
Writing section 1...
Writing section 309...
Done.

SX4 Authorization / SD Repair Procedure Started....
"1140000512880052693FB42EC7CFA7EF69AA82DE.C0003C74" Exists, That is good...
MCU Version	V ICPR72_10w25.3
MCU Date	11-10-10
Product		RM-504 (Nokia 5530 XpressMusic)
Manufacturer	(c) Nokia
IMEI		358307031355297
Mastercode	3630304175
Reading Security Block...
Security block OK and saved to "RM-504_358307031355297_04.11.2011_180332.SecurityBlock.PM"
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
Looking for Virgin PM In Database...
Found, writing...
[1,0] Written, Length: 114 bytes, Status: OK
[1,2] Written, Length: 98 bytes, Status: OK
[1,4] Written, Length: 110 bytes, Status: OK
[1,6] Written, Length: 98 bytes, Status: OK
[1,8] Written, Length: 110 bytes, Status: OK
[1,13] Written, Length: 98 bytes, Status: OK
[1,16] Written, Length: 98 bytes, Status: OK
[1,18] Written, Length: 98 bytes, Status: OK
[1,20] Written, Length: 98 bytes, Status: OK
[1,24] Written, Length: 84 bytes, Status: OK
[1,25] Written, Length: 4 bytes, Status: OK
[1,26] Written, Length: 110 bytes, Status: OK
[1,28] Written, Length: 98 bytes, Status: OK
[1,29] Written, Length: 10 bytes, Status: OK
[1,31] Written, Length: 98 bytes, Status: OK
[1,34] Written, Length: 80 bytes, Status: OK
[309,0] Written, Length: 4 bytes, Status: OK
[309,1] Written, Length: 2 bytes, Status: OK
[309,2] Written, Length: 12 bytes, Status: OK
[309,4] Written, Length: 12 bytes, Status: OK
[309,5] Written, Length: 12 bytes, Status: OK
[309,7] Written, Length: 12 bytes, Status: OK
[309,8] Written, Length: 12 bytes, Status: OK
[309,17] Written, Length: 12 bytes, Status: OK
Write PM Finished, Record written OK: 24, Record written NOT OK: 0

[yurii-62]

Bad phones ack, probably SUPERDONGLE_KEY corrupted !
Wrong response to SD verify request

Security block OK and saved to "RM-504_358307031355297_04.11.2011_180332.SecurityBloc k.PM"
SX4 Status: Not authorized (74)
Write PM Finished, Record written OK: 24, Record written NOT OK: 0

хотя RM-504 5530 я SECURITY_TEST failed! МХВОХ правил...