Не удается разблокировать HTC HD7

[haydeGen]

Доброе время суток... возможно кто ниб. знает в чем трабл?

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.21, JTAG Manager Version: 1.28
Selected Resurrector: [HTC HD7]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x66BC (512MB)
Selected Unlocking Data for the NAND Chip with Page size = 4KB

Unlocking the Phone...FAILED
ERROR: Unlock was not Completed due to Error: 0x3901

[kotlik]

Привет,
Вам необходимо поставить галочку "IMEI" окно во-первых, HTC раздела должны быть восстановлены в первую очередь.

посмотрите здесь

второй и третий результат поиска

[haydeGen]

Мне ненуна восстанавливать ТА, мне нуна его отвязать от оператора - и все!

из черного

alex_big5
01-19-2011, 10:04
Unlock not done HTC Desire

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.22
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x66BC (512MB)
Selected Unlocking Data for the NAND Chip with Page size = 4KB

Unlocking the Phone...FAILED
ERROR: Unlock was not Completed due to Error: 0x3901



alex_big5
01-19-2011, 11:05
Unlock not done HTC Desire

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.22
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x66BC (512MB)
Selected Unlocking Data for the NAND Chip with Page size = 4KB

Unlocking the Phone...FAILED
ERROR: Unlock was not Completed due to Error: 0x3901

This FLASH1 Chip ID:ID: 0x00EC/0x66BC not support unlock?

legija
01-28-2011, 16:53

Hi,
You need to tick "IMEI" box first, HTC Partition need to be rebuilt first.




alex_big5
01-19-2011, 20:05
Firmware Version: 1.16, JTAG Manager Version: 1.22
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x66BC (512MB)
Selected Unlocking Data for the NAND Chip with Page size = 4KB

Unlocking the Phone...OK
Unlock complete!

[haydeGen]

Думаю, тему стоит закрыть!