Не получается восстановить Samsung S5260

[tobiko1]

Пришел Samsung S5260 с убитым бутом ,телефон был рабочий люди хотели снять защитный код и не удачно прошили.
При восстановлении бута доходит до 11% и выдаёт ошибку:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [Samsung S5260]

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 3.01V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0040 (256MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x2E (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x2E (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x2E (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000000

фулл тоже не хочет писать ,выдаёт ошибку.