Обновления RIFFbox JTAG

[yurii-62]

03.04.2012
RIFF JTAG – Samsung Galaxy Mini – GT-S5570i Unbrick – Boot repair supported
Repairing bricked Samsung S5570i is easy with RIFF Box. To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.
In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.
To resurrect Samsung S5570i:
Solder JTAG cable to Samsung S5570i JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung S5570i is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Menu’ keys and press Power-On.
If nothing happens, try an alternative: hold both ‘Volume Up’ and ‘Menu’ keys and press Power-On.
.

источник:
http://www.jtagbox.com/jtag-news/rif...pair-supported

[yurii-62]

06.04.2012

RIFF JTAG - MIPS32 Поддержка RIFF Box прошивка v1.32, RIFF JTAG Manager v1.42 выпущен

RIFF Box Firmware 1,32
Добавлена поддержка архитектуры MIPS32 для TAP контроллера с ИК длина = 05 бит (например ALI 3329 процессоров)
Добавлена поддержка архитектуры MIPS32 для TAP контроллера с ИК длина = 08 бит (например, процессор BCM5352)
Некоторые незначительные улучшения в TEGRA2
RIFF JTAG Manager 1,42
Добавлена поддержка архитектуры MIPS32!
Добавлено сочетание клавиш "Ctrl + F" для быстрого и удобного отображения "Поиск DLL" окна.
Это работает с любой страницы Менеджер JTAG, это более удобная альтернатива обычному действию поиска, когда пользователь должен перейти на воскресение страницы и нажмите кнопку "Поиск DLL" кнопку.
Добавлен "riffpbin" формат поддержки DCC Read / Write страница операций
Некоторые незначительные косметические исправления
Новый запуск логотипа!


Статья:
http://www.jtagbox.com/jtag-news/rif...-v142-released

[yurii-62]

04.05.2012

RIFF JTAG – Samsung SGH-T679 Exhibit II 4G (Samsung Ancora) Unbrick – Dead Boot repair supported
Repairing bricked Samsung T679 is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Please note, MSM8255T is multi-core chipset – it has ARM11 and Qualcomm Scorpion cores. During power on sequence only ARM11 core is visible on the JTAG chain. If boots are not completely damaged and it comes up to initializing of the Scorpion core then Scorpion core appears on the JTAG chain too. This will shift ARM11 from TAP0 into TAP1 position on the chain, while current resurrector has the ARM11 core hardcoded at TAP0 position. Thus make sure to establish JTAG connection in the time range while Scorpion core is not visible yet.
To resurrect Samsung T679:
Solder JTAG cable to Samsung T679 JTAG pads;
Make sure Samsung T679 is selected in the list of models;
Insert battery and connect USB Data cable;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.
.
источник:
http://www.jtagbox.com/jtag-news/rif...pair-supported