C6.01. RM-718 Не включается после прошивки

[FARI-N1]

Стирание через BEST

User ACCEPTED FULL ERASE
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     0AB00001EFDD0344F76247019436D4E4E442F873
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.11.0 
Processing RAWLOADER...
FLIC : 00680020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.11.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02 

- > Backup check skipped by user

Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02

Reading NPC certificate...
IMEI : 000000000000000
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
Cert Read done!


ADL: Preparing for erase...

Full Erase started...
Asic : CMT , Sub : NAND
Erase Area 0x00000000-0x3FFFFFFF
Erasing Ok , [0F]
Erase done , time : 00:00:13 

ADL: Erase done

ADL: Close_Session
Content: 000205000000000000FFFF00000000
ADL: Reboot
Phone disconected!

Прошивка через BEST

Selected FlashSettings : Manual
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : RM-718_022.014_79.92_prd.core.fpsx
PPM : RM-718_022.014_04.01_Russian_79.92_prd.rofs2.fpsx
PPM2 : RM-718_022.014_00.01_79.92_prd.rofs3.fpsx
CNT : RM-718_022.014_10.01_79.92.uda.fpsx
APE : RM601_APE_ONLY_ENO_11wk15_PS2_v0.063.fpsx
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID:       000000030000022600010007600C192102031104
CPU ID :       RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID:        00001040
EM1 ID:        00001030
PUBLIC ID:     0AB00001EFDD0344F76247019436D4E4E442F873
ASIC MODE ID:  00
ROOT KEY HASH: 916F75217F32081248B15C38DFC8E81B
ROM ID:        E693EF0DAC22615B
Use RAPUv11_2nd.fg  ,  Rev : 3.0  Ver : 12.11.0 
Processing RAWLOADER...
FLIC : 00680020
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg  ,  Rev : 3.0  Ver : 12.11.0 
Processing PASUBTOC ...
Processing ALG ...
Boot Done! :)
TIME : Boot time : 00:00:02 
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
   ===Flashing [MCU]===
Erase : Processing RM-718_022.014_79.92_prd.core.fpsx
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:04 
Write : Processing RM-718_022.014_79.92_prd.core.fpsx
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [SOS+PMML]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [GENIO_INIT]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 457 blocks
TIME : Write time : 00:00:21 
MCU Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

   ===Flashing [PPM]===
Erase : Processing RM-718_022.014_04.01_Russian_79.92_prd.rofs2.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing RM-718_022.014_04.01_Russian_79.92_prd.rofs2.fpsx
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 193 blocks
TIME : Write time : 00:00:11 
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

   ===Flashing [PPM2]===
Erase : Processing RM-718_022.014_00.01_79.92_prd.rofs3.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing RM-718_022.014_00.01_79.92_prd.rofs3.fpsx
CMT: Writing Hash CERT [SOS+ROFS3]
Total writen 2 blocks
TIME : Write time : 00:00:00 
PPM Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

   ===Flashing [CNT]===
Erase : Processing RM-718_022.014_10.01_79.92.uda.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:04 
Write : Processing RM-718_022.014_10.01_79.92.uda.fpsx
Total writen 531 blocks
TIME : Write time : 00:00:24 
CNT Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

   ===Flashing [APE]===
Erase : Processing RM601_APE_ONLY_ENO_11wk15_PS2_v0.063.fpsx
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00 
Write : Processing RM601_APE_ONLY_ENO_11wk15_PS2_v0.063.fpsx
CMT: Writing Hash CERT [SOS*ENO]
Total writen 20 blocks
TIME : Write time : 00:00:00 
APE Write done
ADL: Request programm status
NAND status : 00000004 / 00000004 / 00000000

ADL: Close_Session
Content: 000300000000040000000400000000
ADL: Reboot

Flashing done!
Total flash time : 00:01:08
Reboot phone now...

Стирание через цыклон

USB Voltage	5,02v	PASSED
MCU Voltage	3,28v	PASSED
Core Voltage	1,80v	PASSED
VBAT Voltage	0,01v	PASSED
VBAT Voltage	4,99v	PASSED
Box VPP disabled
VPP Voltage	0,04v	PASSED
Internal Box VPP Enabled
VPP Voltage	4,90v	PASSED
Box VPP disabled
VPP Voltage	0,04v	PASSED
External Box VPP Enabled
VPP Voltage	0,04v	FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Avaiable Physical Memory: 547.188MB
Avaiable Virtual Memory: 1.467GB
Avaiable Pagefile: 2.14GB
Initializing FBUS...
All initialized - Ready to work
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID:	000000030000022600010007600C192102031104
CMT_EM_ASIC_ID:		00001040
CMT_EM_ASIC_ID:		00001030
CMT_PUBLIC_ID:		0AB00001EFDD0344F76247019436D4E4E442F873
CMT_ASIC_MODE_ID:	00
CMT_ROOT_KEY_HASH:	916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC:	E693EF0D
CMT_SECURE_ROM_CRC:	AC22615B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.48.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020006800000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020006800000031, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00200068 (ST), Size: 1024MBytes, VPP: Not Supported
FlashChip 0x00200068 (ST), Size: 1024MBytes, VPP: Not Supported
RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.48.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: C436DE8B3DEA6D6C6CCE9CBE15F7C501BB822D02
APE Subsystem Not Found
Erasing flash chip...
Started group flash erase
EraseArea[0,CMT]: 0x00000000-0x3FFFFFFF, ONENAND
Waiting 640s for erasure finish...
Erase taken 13.328s
Restarting MCU...
BB5 Full Erase Finished!

[yurii-62]

Стирание прошивку через BEST по Fbus не пробовали сделать..