Philips Xenium X126 код пользователя.

[slawok25]

Посредством уменьшения скорости до 57600 удалось продвинуться в процессе прошивки до этого момента:

ЛОГ момента вылета

Device synchronized.
Boot-loader is active
EBL version: XMM1100_RAM_Bootloader 33291..144
Boot mode is: BB
Using: Faster CRC, Writing all blocks
Package length is 2048
Baud rate set to 57600
Get flash id.
CFI stage 1
Flash ID is: 401600EF
CFI stage 2
Boot process finished

Start downloading item 'CODE:XMM1100_32M_SafeMode.fls'' from file 'C:\Users\USERUS\Desktop\2\CTX126\X126_I1100D_1151 _XX_V38A_RU_f7177163c833dff4b38fc8d2872f1ec61017\X 126_I1100D_1151_XX_V38A_RU\XMM1100_32M_SafeMode.fl s''.
Erasing the dynamic eeprom area
Sending sec-pack.
Load region 0
Use flash pre-erase.
Process time was 33.7 sec.

Stopped at 30% total, 0% current
Timeout occured during packet reception
The phone did not answer within the timeout period. This could be that the communication is interrupted or that the target SW is in an endless loop.
Check the connection to the phone, battery etc. If the problem persists report the error to the developer.
Channel 1 is succesfully closed.

Да и кроме того исчезли крокозяблы в логе...Но как его заставить преодолеть Failed FLS