Connect phone on selected interface...
Core : v1.64 , BB5XG FlashEngine : v4.2
Core : v1.64 , BB5XG FlashEngine : v4.2
Core : v1.64 , BB5XG FlashEngine : v4.2
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm455__4.91.mcusw
PPM : rm455__4.91.ppm_nat
CNT : rm455__4.91_ISM_001.image__pre_nat_n_attus
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 1C10010596A80344381C76AF0790F6134AC3944B
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : blank (Erased or HW failure)
ADL: phone is in flash mode
Backup enabled, will read all certificates...
Reading NPC certificate...
Reading CCC certificate...
Reading HWC certificate...
Reading R&D certificate...
Reading VARIANT certificate...
Reading PARTNERC certificate...
Reading MDM_KEYS certificate...
- > No any CRT data (MCU damaged/CERT erased), skip saving
=== SW Version Check ===
- > Can not collect initial info, continue flashing...
- > Hope, this version will be ok
=== SW Version Check ===
===Flashing [MCU]===
Erase : Processing rm455__4.91.mcusw
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm455__4.91.mcusw
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [LDSP]
CMT: Writing Hash CERT [MCUSW]
CMT: Writing Hash CERT [ISA+DYNSW]
Total writen 212 blocks
TIME : Write time : 00:00:05
MCU Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
===Flashing [PPM]===
Erase : Processing rm455__4.91.ppm_nat
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:00
Write : Processing rm455__4.91.ppm_nat
Total writen 43 blocks
TIME : Write time : 00:00:01
PPM Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
===Flashing [CNT]===
Erase : Processing rm455__4.91_ISM_001.image__pre_nat_n_attus
Partitioning....
Partitioning Ok...
Erasing....
Erasing Ok...
TIME : Erase time : 00:00:01
Write : Processing rm455__4.91_ISM_001.image__pre_nat_n_attus
Total writen 104 blocks
TIME : Write time : 00:00:02
CNT Write done
ADL: Request programm status
NAND status : 00000002 / 00000002 / 00000000
ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
Flashing done!
Total flash time : 00:00:12
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 6350
Software Info: V 4.91 23-07-09 RM-455 (c) Nokia
IMEI: 12345610654321?
PPM version : V 4.91 23-07-09 RM-455 (c) Nokia NAT
Product code:
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Elapsed: 00:01:03
Connect phone on selected interface...
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm455__4.91.mcusw
PPM : rm455__4.91.ppm_nat
CNT : rm455__4.91_ISM_001.image__pre_nat_n_attus
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
Error, when try do backup CRT308
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm455__4.91.mcusw
PPM : rm455__4.91.ppm_nat
CNT : rm455__4.91_ISM_001.image__pre_nat_n_attus
Flashing phone now...
Check files done...
-> SWversion check skipped : Manual mode selected
Backup CRT308 data...
Error, when try do backup CRT308
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Reading Phone Info....
Connected phone - Nokia 6350
Software ver : V 4.91 23-07-09 RM-455 (c) Nokia
IMEI : 12345610654321?
XappVer : 00000668
DSP Ver : ICPR81_09w21
PPM : V 4.91 23-07-09 RM-455 (c) Nokia NAT
CNT : Content: n_attus_locked_24July09 V 4.91 23-07-09 RM-455 (c) Nokia
Product SN : 0
Product code :
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 40
Tahvo : 00
Batery: 4074 mV
CMT BT: 410B-v170
LCDVer: TPO
Lock info ===========
IMEI : 12345610654321?
IMEI spNet : 1A 32 54 16 60 45 23 01
IMEI svNet : 13 32 54 16 60 45 23 21 F4
Unable to read Lock table...
IMEI DAMAGED!!! CRT308 save skipped...
SDD key status : Damaged!!!!!
CMLA Key status : Not Present
SimLock status : Ok
Security status : Ok
PA_SimLock Version :
PA_SL phone detected
User code : Crypted
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]
Done!
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
WMDRM key found!
-> Skip Flash keys Part, for Flash Part use Dead Mode!!!!!
Writing SimLock Key... Error!
Writing SimLock Data... Error!
Product Code Update : 0571152
SDD Key status : SDData Damaged!!!!!
SimLock status : SimLock is Ok
Security status : Security is Ok
WMDRM_PD key sent... Ok
Done!
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
WMDRM key found!
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 1C10010596A80344381C76AF0790F6134AC3944B
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 98916E2ECE312FECE674FC8F0E197FE600A5E563
ADL: Preparing for write certificates...
Erase NPC... Ok
Writing NPC... Ok
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok
ADL: Writing Flash certs done!
ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
Wait, reconneting...
Writing SimLock Key... Ok!
Writing SimLock Data... Ok!
Product Code Update : 0571152
SDD Key status : SDData Damaged!!!!!
SimLock status : SimLock is Ok
Security status : Security is Ok
WMDRM_PD key sent... Ok
Done!
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Repair SD procedure started...
Phone Imei: 355969040585413
- > Power Off phone, dissconnect it and connect
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
PUBLIC ID: 1C10010596A80344381C76AF0790F6134AC3944B
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
Fetching data, wait...
- > Reinsert cable and battery, press powerOn button again
- > For X7, E7 - just waiting, near 1 minute
- > When BEST start Search Phone - Press PowerOn if needed
Dead Mode is Selected
Waiting for USB device...
--- Insert cable and charger or press phone's power button! ---
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 1C10010596A80344381C76AF0790F6134AC3944B
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:02
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 98916E2ECE312FECE674FC8F0E197FE600A5E563
ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
Wait, reconneting...
rap= 1C10010596A80344381C76AF0790F6134AC3944B
hash= 25B977A055BE9B5DEC0C38A2A279C695
key= 194961F25F73A294366F06204FBE8F5B6652794F
Key file updated...
Operating mode is OK, no need change...
Writing Super Dongle Key... Ok!
Done!
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!
Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 355969040585413
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Upload PM checked
Uploading RF/Battery tune to phone...
RM-455.pm not exist
Select file, please
Using : RM-455 Nokia 6350_355969040585413_0_400.pm
Operating mode is OK, no need change...
Check ST_SECURITY now...
Security status : ST_SECURITY => DAMAGED
- > Try "Restore CCC/HWC" option, after SX4 again
Done!
Elapsed: 00:02:59
Upload done
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Will Write CCC/HWC keys now...
RM-455.rpl not exist
Select file, please
Using : 355969040585413_CRT.rpl
CCC Data found!
HWC Data found!
Connection opened successfully
Waiting for communication response...
BootRom : 1st boot ok
ASIC ID: 000000030000022600010007600C192102011104
CPU ID : RAPU v11 , Features : Dead-Test , USBRPL , FullUSB
EM0 ID: 00001040
EM1 ID: 00001030
PUBLIC ID: 1C10010596A80344381C76AF0790F6134AC3944B
ASIC MODE ID: 00
ROOT KEY HASH: 25B977A055BE9B5DEC0C38A2A279C695
ROM ID: 3E273BF637BE26FA
Use RAPUv11_2nd.fg , Rev : 3.0 Ver : 12.14.0
Processing RAWLOADER...
FLIC : 004000EC
Req : XSR 1.6
Use RAPUv11_XSR17_alg.fg , Rev : 3.0 Ver : 12.14.0
Processing PASUBTOC ...
Processing ALG ...
Boot Done!
TIME : Boot time : 00:00:01
Reopening the connection...
Waiting for response: 30
ADL: Check mode
Select ASIC [C900]
PAPUBkeys : 98916E2ECE312FECE674FC8F0E197FE600A5E563
ADL: Preparing for write certificates...
Erase CCC... Ok
Writing CCC... Ok
Erase HWC... Ok
Writing HWC... Ok
ADL: Writing Flash certs done!
ADL: Close_Session
Content: 000300000000020000000200000000
ADL: Reboot
All done, disconneting...
Done!
Elapsed: 00:00:18
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!
Local SX4 procedure started...
Check SD : Key is Ok
Phone Imei: 355969040585413
Use custom key...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Upload PM checked
Uploading RF/Battery tune to phone...
RM-455.pm not exist
Select file, please
Using : RM-455 Nokia 6350_355969040585413_0_400.pm
Operating mode is OK, no need change...
Check ST_SECURITY now...
Security status : ST_SECURITY => OK
Done!
Elapsed: 00:00:07
Upload done
Reading Phone Info....
Connected phone - Nokia 6350
Software ver : V 4.91 23-07-09 RM-455 (c) Nokia
IMEI : 355969040585413
XappVer : 00000668
DSP Ver : ICPR81_09w21
PPM : V 4.91 23-07-09 RM-455 (c) Nokia NAT
CNT : Content: n_attus_locked_24July09 V 4.91 23-07-09 RM-455 (c) Nokia
Product SN : 0
Product code : 0571152
Long Prod.SN : 0
Hardware info=======
HWID :
Retu : 40
Tahvo : 00
Batery: 4057 mV
CMT BT: 410B-v170
LCDVer: TPO
Lock info ===========
IMEI : 355969040585413
IMEI spNet : 3A 55 69 09 04 85 45 01
IMEI svNet : 33 55 69 09 04 85 45 21 F4
Conf key : 8000000000000000
Provider key : 3101700000000000
Country : United States of America
Operator : AT&T
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 6
LOCK STATUS :
=============================
BLK : 1
Lock1:Close
BLK : 2
Lock1:Close
BLK : 3
Lock1:Close
BLK : 4
Lock1:Close
BLK : 5
Lock1:Close
BLK : 6
Lock1:Close
=============================
LOCKS : Closed
=============================
CRT308 Backup Created
SDD key status : Ok
CMLA Key status : Not Present
SimLock status : Ok
Security status : Ok
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
User Code : not set
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]
Done!
Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------
PA_SimLock Version :
PA_SL3 phone , SP_CODE_LEN : 15
Done!
Phone disconected!
31.05.2013, 00:00
Похожие темы
Комбинированный вид
