Успешное применение, без комментариев [InfinityBox CM2 SPD]

[slavkinj]

Аппарат на SC6531 , китайская "Nokia 1020".
Пришел с кодом пользователя , и невозможностью позвонить с SIM2. (Звонок после набора номера , через 4 секунды сбрасывался).

Чтение user code

 ====  Wait for phone...

Phone found! [ 241 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3 0A 1Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2 ule<Boot Ok
CPU ID : 6531 , FDLStat : 0000
[0] Flash DIE : 00C8 0060 0018 0000
[0] Flash VEN : GigaDevice , GD25LQ128
[0] Flash CAP : 01000000
Check data... Can take some time

User Code : 1234

Done!

Read Full firmware

 ====  Wait for phone...

Phone found! [ 241 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3 1: =Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2 ule<Boot Ok
CPU ID : 6531 , FDLStat : 0000
[0] Flash DIE : 00C8 0060 0018 0000
[0] Flash VEN : GigaDevice , GD25LQ128
[0] Flash CAP : 01000000
Read Flash Content
Read Ok , collect info
Platform : MOCOR_12B_6531.W13.07_Release
Project  : SC6531_PDA
HWInfo   : SC6531_PDA
Compile  : 10-12-2013 16:01:13
Set FileInfo : 
Model Vendor : China SC6531
Model Name   : Nokia 1020
ExtInfo Data : RU
Saved to : C:\InfinityBox\CM2SPD_1.03\Read_out\SPD6531_01000000_MOCOR_12B_6531.W13.07_Release_10122013160113_RU__China SC6531-Nokia 1020.bin
Done!

Elapsed: 00:02:05

Reconnect Power/Cable!

Read NV

 ====  Wait for phone...

Phone found! [ 241 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3    4Sync...
Sending boot ... 
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2 ule<Boot Ok
CPU ID : 6531 , FDLStat : 0000
[0] Flash DIE : 00C8 0060 0018 0000
[0] Flash VEN : GigaDevice , GD25LQ128
[0] Flash CAP : 01000000
Check data ... 
Reading NV ... 
Saved to : C:\InfinityBox\CM2SPD_1.03\phdata\backup\Nokia 1020_6531_NV_00008000.nv

Elapsed: 00:00:24

Собственно вспомнив о ситуациях , когда не заливался назад считанный NVRAM на мтк , то решил попробовать залить его назад. Успешно.

Write NV

==== Wait for phone...

Phone found! [ 241 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3 4Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2 ule<Boot Ok
CPU ID : 6531 , FDLStat : 0000
[0] Flash DIE : 00C8 0060 0018 0000
[0] Flash VEN : GigaDevice , GD25LQ128
[0] Flash CAP : 01000000
Check data ...
Write NV data ...
Block prepare Ok, Flashing
Flashing Done!

Elapsed: 00:00:13

Reconnect Power/Cable!

Потом repair с галкой "FFS" , успешно решил проблему с исходящими звонками.

Repair NV/FFS/Link

==== Wait for phone...

Phone found! [ 241 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3 4Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2 ule<Boot Ok
CPU ID : 6531 , FDLStat : 0000
[0] Flash DIE : 00C8 0060 0018 0000
[0] Flash VEN : GigaDevice , GD25LQ128
[0] Flash CAP : 01000000
Check data ...
Block prepare Ok, Flashing
Flashing Done!

Elapsed: 00:00:31

Reconnect Power/Cable!

Finish at : [10.12.2015 / 15:05:50]

[gulka]

TEXET X-pad HIT 7 3G SC5735 eMMC

[gulka]

FLY FS452 sc7731g The virus is removed by writing firmware

20160105_134201.jpg

Loading    : FS452_SW_20151111_SW15_FLY.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : SW15_FLY_FS452_2015_11_11
FastCheck  : 0x466B626F

Loading files ... 

File : fdl1.bin
File : fdl2.bin
File : nvitem__GSMQ_band128_TS21_4506F_20151010_W15.09.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : fly_logo.bmp
File : fly_logo.bmp(1)
File : cache.img
File : u-boot.bin
File : SC77xx.xml

Load Ok!

Start  at : [05.01.2016 / 14:19:41]
Operation : Flash [ v1.10 ]

======= Flash
Files set for flashing : 
[ MCU ] : FS452_SW_20151111_SW15_FLY.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : SW15_FLY_FS452_2015_11_11
File : fdl1.bin
File : fdl2.bin
File : nvitem__GSMQ_band128_TS21_4506F_20151010_W15.09.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : fly_logo.bmp
File : fly_logo.bmp(1)
File : cache.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : CODE  
Current ID : PRODNV
Current File : prodnv.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID   : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : MODEM_W
Current File : SC7702_sc7731g_band128.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : DSP_W
Current File : DSP_DM_G2.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : MODEM_WCN
Current File : SC8800G_x30g_wcn_dts_modem.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : BOOT
Current File : boot.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : RECOVERY
Current File : recovery.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : BOOTLOGO
Current File : fly_logo.bmp
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : FASTBOOT_LOGO
Current File : fly_logo.bmp(1)
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID   : UBOOTLOADER
Current File : u-boot.bin
Flashing now ... 
[FlashProc] : Ok!


Elapsed: 00:04:51

[AGrishutin]

Micromax X2050

Operation : Check/Read Info [ v1.11 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000

Elapsed: 00:00:14

Reconnect Power/Cable!

Operation : Read NV [ v1.11 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Check data ...
Reading NV ...
Saved to : D:\InfinityBox\CM2SPD\phdata\backup\MICROMAX_X2050 _ 6531_NV_00008000.nv

Elapsed: 00:01:13

Reconnect Power/Cable!

Operation : Read FullFlash [ v1.11 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Read Flash Content
Read Ok , collect info
Set FileInfo :
Model Vendor : MICROMAX
Model Name : X2050 BY MOBILAGSM.RU
ExtInfo Data : RU,EN
Saved to : D:\InfinityBox\CM2SPD\Read_out\SPD6531_00400000_GD 25LQ32_RU,EN__MICROMAX-X2050 BY MOBILAGSM.RU.bin
Done!

Elapsed: 00:00:54

Reconnect Power/Cable!

Operation : Read User Code [ v1.11 ]

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Check data... Can take some time

User Code : 12345678

Done!

Elapsed: 00:00:29

Reconnect Power/Cable!

Operation : Repair Security [ v1.11 ] правка IMEI

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Process can take some time, please, wait
Init ok, send data
Write done!
Elapsed: 00:00:12

Reconnect Power/Cable!

Operation : Format File System [ v1.11 ]

Settings : SmartFormat is On

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 38 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2
Boot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00C8 0060 0016 0000
[0] Flash VEN : GigaDevice , GD25LQ32
[0] Flash CAP : 00400000
Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!

Elapsed: 00:00:15

Reconnect Power/Cable!

после формата user code ушел, imei на месте ... все ок.