Успешное применение, без комментариев [InfinityBox CM2 SPD]

[MygsmWorld]

Spice Xplor-525Q SC7731G Android Version 5.1 Firmware Read & Converted To Pac.


Operation : Check/Read Info [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 30 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ... 

Model Name  : sp7731geahdplusoversea
Model Brand : Spice
Model Device: Xplor-525Q
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HD
CompileDate : 1/15/2016 12:11:45 PM
Project Ver : Spice_Xplor-525Q_IND_Ver11.0_160115_1200
Model Ext   : Xplor-525Q

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:19

Reconnect Power/Cable!

Operation : Read FullFlash [ v1.21 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 30 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 30 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!



Model Name  : sp7731geahdplusoversea
Model Brand : Spice
Model Device: Xplor-525Q
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HD
Project Ver : Spice_Xplor-525Q_IND_Ver11.1_160129_1200
Model Ext   : Xplor-525Q

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1517 MiB
Saved to : C:\InfinityBox\CM2SPD\Flash\SP7731GEA_HD_Xplor-525Q_5.1_Spice_Xplor-525Q_IND_Ver11.1_160129_1200_Xplor-525Q\
Done!

Elapsed: 00:13:17

Reconnect Power/Cable!

Operation : Convert InfinitySC to SPRD PAC [ v1.21 ]

Target : SP7731GEA_HD_Xplor-525Q_5.1_Spice_Xplor-525Q_IND_Ver11.1_160129_1200_Xplor-525Q
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731g_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[ADD FILE] : logo_540x960.bin
[ADD FILE] : fblogo_540x960.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0018
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:01:37

Saved to : SP7731GEA_HD_Xplor-525Q_5.1_Spice_Xplor-525Q_IND_Ver11.1_160129_1200_Xplor-525Q.pac
Done!

Boot : Volume Up Key. & Cellphone Rooted By iRoot.