Успешное применение, без комментариев [CM2MTK MediaTek]

[gulka]

SUPPU X6000 IP67 Прочный Водонепроницаемый Power Bank Телефон

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 88 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 31656166D425A880B524B45FF8F65E85
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000 
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ... 

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : L6135_CSJ_X6_FLB_A9_PCB01_gprs_MT6261_S01.L6135_CSJ_X6_FLB_A9_V1_00.bin
FileVersion : L6135_CSJ_X6_FLB_A9_V1.00

[ScatCFG] : MT6261 / L6135_CSJ_X6_FLB_A9_V1.00 / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\L6135_CSJ_X6_FLB_A9_PCB01_gprs_MT6261_S01\

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

[gulka]

BQS-4560 Golf ПРОШИВКА

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : A80111303546484D4210000009255331
[WARNING] : MEMORY_eMMC_VALIDATE_FAILED
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xA8 , OEM : 0111
[eMMC] : FLASH_INF : [NOT_IN_BASE] , BMHF5
[eMMC] : FLASH_CID : A80111303546484D4210000009255331
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001BB000000
[eMMC] : FLASH_UCP : 7088 MiB [eMMC 8 GiB]
DEV RID    : 0x2C5B2F4A48D3B92372C65B2A7E89FDCB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : BQ
ProdName  : BQS-4560
ProdModel : BQS-4560
Device    : BQS-4560
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : w828_644_ax_gqbn_g828_bq_v1.6

[Read Ok] : preloader_w828_644_ax_gqbn_g828_bq.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / w828_644_ax_gqbn_g828_bq / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1655 MiB
Scatter saved to : C:\Users\TIMUR\Desktop\MT6580__BQ__BQS-4560__BQS-4560__5.1__w828_644_ax_gqbn_g828_bq_v1.6\

All done!

Done!
Elapsed: 00:06:42
Reconnect Power/Cable!