Успешное применение [CM2QLM Qualcomm]

[sever20067]

Micromax Q415

Чтение

Operation : Read Flash [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8909]
ID_BLOCK_S : 03A73E80
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 5BF3348E755E6533
ID_BLOCK_L : C060A78CDD0D54FF
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!


Brand : Micromax
ProdName : Q415
ProdModel : Micromax Q415
Device : Q415
AndroidVer: 5.1.1
Manufact. : Micromax
QLMxCPU : MSM8909

DevInfo : MSM8909__Micromax__Micromax__ANDR_v5.1.1__Micromax _Q415__Q415__Q415

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : splash.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : oem.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8909 / eMMC
Firmware Size : 1607 MiB

Done!
Elapsed: 00:02:41

Прошивка

Operation : Flash [ v1.04 ]

Verify FW package ...

Error : Firmware NOT selected! Nothing to do!

Reconnect Power/Cable!

Loading firmware ...
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Micromax
Device Manufact.: Micromax
Device Model : Q415
Device CPU : MSM8909
Device IntName : Q415
Device Version : 5.1.1
CU_SWVer : Micromax
Device Compile : 08.04.2016 2:05:10
Device ExtInfo : Micromax Q415
Load Ok!

Operation : Flash [ v1.04 ]

Verify FW package ...
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8909]
ID_BLOCK_S : 03A73E80
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 5BF3348E755E6533
ID_BLOCK_L : C060A78CDD0D54FF
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!

Files in Chain : 25
Flashing now

Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : splash.img
Flashing : sec.dat
Flashing : boot.img
Flashing : system.img
Flashing : persist.img
Flashing : cache.img
Flashing : recovery.img
Flashing : oem.img
Flashing : userdata.img
Flashing : gpt_backup0.bin

Boot settings configured!

Flashing done!

Done!
Elapsed: 00:04:47

Сброс FRP

Operation : Reset Settings [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 210 [MSM8909]
ID_BLOCK_S : 03A73E80
ID_BLOCK_I : 009600E1
ID_BLOCK_L : 5BF3348E755E6533
ID_BLOCK_L : C060A78CDD0D54FF
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8909 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x0000C000/00100000/00001000/00001000
Boot Ok!

Remove FRP ( Google Reset Protection )
FRP removed!

Done!
Elapsed: 00:00:20

После прошивки данные пользователя не подтянулись. Так и должно быть?