Успешное применение, без комментариев [InfinityBox CM2 SPD]

[motokmips]

Прошивка Dexp E140

Card found: S/N : 3016AAE5 , v0135
Chinese Miracle II  [SPD module] v 1.24

Loading    : E140_R01_22.11.2016_V1.5.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC7731_NoISD
PacVersion : E140_R01_22.11.2016_V1.5
FastCheck  : 0x003D8EDF60

Loading files ... 

File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : Ixion_E140_logo.bmp
File : Ixion_E140_logo.bmp(1)
File : cache.img
File : u-boot.bin
File : SC7731_NoISD.xml

Load Ok!

Operation : Flash [ v1.24 ]

======= Flash
Files set for flashing : 
[ MCU ] : E140_R01_22.11.2016_V1.5.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC7731_NoISD
PacVersion : E140_R01_22.11.2016_V1.5
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : Ixion_E140_logo.bmp
File : Ixion_E140_logo.bmp(1)
File : cache.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 35 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : CODE  
Current ID : PRODNV
Current File : prodnv.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID   : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : MODEM_W
Current File : SC7702_sc7731g_band128.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : DSP_W
Current File : DSP_DM_G2.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : MODEM_WCN
Current File : SC8800G_x30g_wcn_dts_modem.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : BOOT
Current File : boot.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : RECOVERY
Current File : recovery.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : BOOTLOGO
Current File : Ixion_E140_logo.bmp
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : FASTBOOT_LOGO
Current File : Ixion_E140_logo.bmp(1)
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID   : UBOOTLOADER
Current File : u-boot.bin
Flashing now ... 
[FlashProc] : Ok!


Elapsed: 00:05:36

Reconnect Power/Cable!

[gulka]

teXet X-mini 2 TM-3500 прошивка

Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 40 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok ,  0x13 , NAND : b256k
[FW_READER] : Step #3 Passed!
Model Name  : scx15_sp7715ga_FS003plus_NativeUIhvga
Model Brand : teXet
Model Device: tm3500
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA_FS003
Project Ver : V1.1.KK.rus.teXet.20150925.104641
Model Ext   : TM-3500

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W15.23.1_Release.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img

AndroidInfo created
Firmware Size : 287 MiB
Saved to : C:\Users\TIMUR\Desktop\SCX15_SP7715GA_FS003_[NAND_b256k]_tm3500_4.4.2_V1.1.KK.rus.teXet.20150925.104641_TM-3500\
Done!

Elapsed: 00:07:03

Reconnect Power/Cable!

Operation : Convert InfinitySC to SPRD PAC [ v1.24 ]

Target : SCX15_SP7715GA_FS003_[NAND_b256k]_tm3500_4.4.2_V1.1.KK.rus.teXet.20150925.104641_TM-3500
Step  #1 : Identify

MEMORY : NAND
LAYOUT : 256 KiB

Step  #2 : Select logic
Select Logic : SC7715

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv_b256k_p4k.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7715_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : CP2._CP2_WCN_14C_W15.23.1_Release.bin
[ADD FILE] : logo_320x480.bin
[ADD FILE] : boot.img
[ADD FILE] : system_b256k_p4k.img
[ADD FILE] : cache_b256k_p4k.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata_b256k_p4k.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0015
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:01:03

Saved to : SCX15_SP7715GA_FS003_[NAND_b256k]_tm3500_4.4.2_V1.1.KK.rus.teXet.20150925.104641_TM-3500.pac
Done!

[gulka]

BQ-5082 Sense 2 Прошивка

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Read FullFlash [ v1.25 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 40 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ... 

Phone found! [ 40 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ... 

Phone found! [ 40 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : t13_x163_S015_invens_64_4_dt
Model Brand : BQ
Model Device: t13_x163_S015_invens_64_4
AndrVersion : 5.1
BaseBand CPU: T13_BOPAI_64_4
Project Ver : HWD_20170317
Model Ext   : BQ-5082

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
Skip [EMP] : FBOOTLOGO
Skip [EMP] : THIRDLOGO
Skip [EMP] : FORTHLOGO
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2078 MiB
Saved to : C:\Users\TIMUR\Desktop\T13_BOPAI_64_4_t13_x163_S015_invens_64_4_5.1_HWD_20170317_BQ-5082\
Done!

Elapsed: 00:07:39

Reconnect Power/Cable!


Operation : Convert InfinitySC to SPRD PAC [ v1.25 ]

Target : T13_BOPAI_64_4_t13_x163_S015_invens_64_4_5.1_HWD_20170317_BQ-5082
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731C_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[ADD FILE] : logo_480x854.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : oem.img
[ADD FILE] : sysinfo.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0019
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:08:45

Saved to : T13_BOPAI_64_4_t13_x163_S015_invens_64_4_5.1_HWD_20170317_BQ-5082.pac
Done!