Успешное применение, без комментариев [InfinityBox CM2 SPD]

[gulka]

BQ-5082 Sense 2 Прошивка

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Read FullFlash [ v1.25 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 40 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
- > Wait phone connected ... 

Phone found! [ 40 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ... 

Phone found! [ 40 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : t13_x163_S015_invens_64_4_dt
Model Brand : BQ
Model Device: t13_x163_S015_invens_64_4
AndrVersion : 5.1
BaseBand CPU: T13_BOPAI_64_4
Project Ver : HWD_20170317
Model Ext   : BQ-5082

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
Skip [EMP] : FBOOTLOGO
Skip [EMP] : THIRDLOGO
Skip [EMP] : FORTHLOGO
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2078 MiB
Saved to : C:\Users\TIMUR\Desktop\T13_BOPAI_64_4_t13_x163_S015_invens_64_4_5.1_HWD_20170317_BQ-5082\
Done!

Elapsed: 00:07:39

Reconnect Power/Cable!


Operation : Convert InfinitySC to SPRD PAC [ v1.25 ]

Target : T13_BOPAI_64_4_t13_x163_S015_invens_64_4_5.1_HWD_20170317_BQ-5082
Step  #1 : Identify

MEMORY : eMMC
LAYOUT : eMMC NORMAL

Step  #2 : Select logic
Select Logic : SC7731

Step  #3 : Processing data
Build PAC
[ADD FILE] : nvitem_w.bin
[ADD FILE] : nvitem_wcn.bin
[ADD FILE] : prodnv.img
[ADD FILE] : u-boot-spl-16k.bin
[ADD FILE] : sc7731C_CP0_modem.bin
[ADD FILE] : DSP_DM_Gx.bin
[ADD FILE] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[ADD FILE] : logo_480x854.bin
[ADD FILE] : boot.img
[ADD FILE] : system.img
[ADD FILE] : oem.img
[ADD FILE] : sysinfo.img
[ADD FILE] : cache.img
[ADD FILE] : recovery.img
[ADD FILE] : userdata.img
[ADD FILE] : u-boot.bin
Build Ok! Result : 0x0019
Sign PAC ... 
Sign Ok! FW compiled!
Elapsed: 00:08:45

Saved to : T13_BOPAI_64_4_t13_x163_S015_invens_64_4_5.1_HWD_20170317_BQ-5082.pac
Done!