|
|
|||||||
| Infinity Box Форум поддержки программатора Infinity Box |
 |
|
|
Опции темы | Оценить тему | Опции просмотра |
21.01.2017, 17:26
|
#61 |
 
Регистрация: 24.02.2007
Адрес: Россия, Москва
Сообщений: 792
Поблагодарил: 177
Поблагодарили 1,853 раз за 461 сообщений
Репа: 1059 |
Не читается граф ключ на 6 и выше, там "GateKeeper" стоит.
|
|
|
|
22.01.2017, 17:23
|
#62 |
|
В бане..
Регистрация: 16.11.2016
Сообщений: 16
Поблагодарил: 28
Поблагодарили 4 раз за 3 сообщений
Репа: 0 |
Удаление FRP на Micromax Q465
Код:
Operation : Format File System / Reset Settings [ v1.24 ] Settings : SmartFormat is On 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 115 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC9830 eMMC Generic Loader v2 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Checking Structure ... Detected eMMC Flash , Structure detect Ok! eMMC phone detected! Will use 'Safe Format' mode! Mount : /data Size : 0x00000002DC8F7000 State : 0x0001 Mount : /cache Size : 0x0000000009600000 State : 0x0001 Prepare Ok! Format Ok! Don't touch phone, until it fully bootup to "Welcome Screen"! Android 5.x : Reset FRP Lock Reset Ok! Done! Elapsed: 00:00:20 Reconnect Power/Cable! Зачет Jaydi 
Последний раз редактировалось gulka; 22.03.2017 в 12:05. |
|
|
|
|
01.02.2017, 22:15
|
#63 |
|
Почетный пользователь
 
Регистрация: 03.03.2005
Адрес: Поволжье Ершов
Сообщений: 1,094
Поблагодарил: 4,979
Поблагодарили 3,108 раз за 848 сообщений
Репа: 1862 |
Успешно снял FRP на Fly FS406 (SC7731C)
Operation : Format File System / Reset Settings [ v1.24 ]
PS Долго не мог подключить этот хитрый Fly к компу.  Оказалось, чтобы подключить его, нужно сначала вставить USB кабель, а потом зажать клавишу "Громкость -". JayDi респект
__________________
 Что бы ты ни сделал в жизни — это будет незначительно. Но очень важно, чтобы ты это сделал |
|
|
|
| Следующие пользователи поблагодарили renat_d за это сообщение: | nodir0077 (01.02.2017) |
|
01.02.2017, 23:48
|
#64 |
|
Регистрация: 24.02.2007
Адрес: Россия, Москва
Сообщений: 792
Поблагодарил: 177
Поблагодарили 1,853 раз за 461 сообщений
Репа: 1059 |
Можно иначе - кабель, кнопки, батарейку после.
|
|
|
|
|
02.02.2017, 07:02
|
#65 |
|
Пользователь
Регистрация: 17.01.2013
Адрес: Узбекистан / Бухара
Сообщений: 43
Поблагодарил: 17
Поблагодарили 17 раз за 11 сообщений
Репа: 55 |
ZTE Blade AF5 Read Pattern
Код:
Operation : Read PatternLock [ v1.24 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 77 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SPRD 773x eMMC loader v3 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! Checking Structure ... Detected eMMC Flash , Structure detect Ok! FlashMode Set : Ok! Reading PatternLock ... Read Ok , decrypt PatternLock Sequence : 32589 Done! Elapsed: 00:00:29 Reconnect Power/Cable! |
|
|
|
|
02.02.2017, 07:05
|
#66 |
|
Пользователь
Регистрация: 17.01.2013
Адрес: Узбекистан / Бухара
Сообщений: 43
Поблагодарил: 17
Поблагодарили 17 раз за 11 сообщений
Репа: 55 |
TEXET TM7866 Read Flash
Код:
Operation : Read FullFlash [ v1.24 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 77 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC5735 eMMC Loader v1.01 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 77 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC5735 eMMC Loader v1.01 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 77 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC5735 eMMC Loader v1.01 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : scx35_sp5735c2eaplus_s906_rgb_UUI Model Brand : teXet Model Device: tm7866rev1 AndrVersion : 4.4.2 BaseBand CPU: SP5735C2EA Project Ver : V1.1.KITKAT.rus.teXet.20150619.094104 Model Ext : X-pad HIT 3G (revision 1) [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc8830_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830_modem_CP2_WCN_14C_W14.51_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_1024x600.bin [Read Ok] : fblogo_768x1024.bin [Read Ok] : boot.img [Read Ok] : system.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 863 MiB Saved to : C:\WORKSPACE\SP5735C2EA_tm7866rev1_4.4.2_V1.1.KITKAT.rus.teXet.20150619.094104_X-pad_HIT_3G_(revision_1)\ Done! Elapsed: 00:03:31 Reconnect Power/Cable! |
|
|
|
|
10.02.2017, 22:20
|
#67 |
|
Новичок
Регистрация: 21.12.2005
Сообщений: 12
Поблагодарил: 1
Поблагодарили 2 раз в одном сообщении
Репа: 0 |
Fly Stratus 6 FS407
Check/Read Info [ v1.24 ]
Read NV [ v1.24 ]
Read FullFlash [ v1.24 ]
|
|
|
|
|
17.02.2017, 09:48
|
#68 |
|
Пользователь
Регистрация: 02.02.2012
Сообщений: 57
Поблагодарил: 0
Поблагодарили 58 раз за 17 сообщений
Репа: 70 |
Lenovo A396 SC8830 NAND Reset User Code
лог
Последний раз редактировалось vekt; 17.02.2017 в 10:29. |
|
|
|
|
03.03.2017, 16:21
|
#69 |
|
Супермодератор
 
Регистрация: 10.11.2005
Адрес: Russia
Сообщений: 2,979
Поблагодарил: 805
Поблагодарили 6,954 раз за 1,595 сообщений
Репа: 1190 |
BQ-4026 UP! Прошивка
Operation : Read FullFlash [ v1.24 ] Код:
1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 40 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable PickUp loaders from pac FDL Ready! Boot Ver : Spreadtrum Boot Block version 1.1 Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 40 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable PickUp loaders from pac FDL Ready! Boot Ver : Spreadtrum Boot Block version 1.1 Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 40 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable PickUp loaders from pac FDL Ready! Boot Ver : Spreadtrum Boot Block version 1.1 Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : BQ-4026 Model Brand : BQ Model Device: BQ-4026 AndrVersion : 6.0 BaseBand CPU: BQ-4026 Project Ver : MRA58K release-keys Model Ext : BQ-4026 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731C_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_480x800.bin [Read Ok] : fblogo_480x800.bin [Read Ok] : boot.img [Read Ok] : system.img [Read Ok] : sysinfo.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 1331 MiB Saved to : C:\Users\TIMUR\Desktop\BQ-4026_BQ-4026_6.0_MRA58K_release-keys_BQ-4026\ Done! Elapsed: 00:09:33 Reconnect Power/Cable! |
|
|
|
|
22.03.2017, 11:13
|
#70 |
|
Пользователь
Регистрация: 01.04.2006
Адрес: Россия
Сообщений: 339
Поблагодарил: 68
Поблагодарили 72 раз за 37 сообщений
Репа: 38 |
FLY IQ4490i Прошивка
Код:
Start at : [22.03.2017 / 9:48:55] Operation : Flash [ v1.24 ] ======= Flash Files set for flashing : [ MCU ] : IQ4490i_SW_20151008_SW14_FLY.pac CRVersion : BP_R1.0.0 PacCPUinfo : SC7715 PacVersion : SW14_FLY_IQ4490i_20151008 File : fdl1.bin File : fdl2.bin File : nvitem.bin File : nvitem_wcn.bin File : prodnv.img File : u-boot-spl-16k.bin File : SC7702_sc7715_modem.bin File : DSP_DM_G2.bin File : SC8800G_sc7715_wcn_modem.bin File : LOGO.bmp File : LOGO.bmp(1) File : boot.img File : system.img File : cache.img File : recovery.img File : userdata.img File : u-boot.bin 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 35 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable PickUp loaders from pac FDL Ready! Boot Ver : Spreadtrum Boot Block version 1.1 Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! PMTManager : Load 0x17 records PMTManager : PMT Update Ok! Flashing now [FlashProc] : CODE Current ID : PRODNV Current File : prodnv.img Flashing now ... [FlashProc] : Ok! [FlashProc] : ERASE Current ID : ERASEUBOOT Current Part : uboot [FlashProc] : Ok! [FlashProc] : BOOTCODE Current ID : SPLLOADER Current File : u-boot-spl-16k.bin Flashing now ... [FlashProc] : Ok! [FlashProc] : CODE Current ID : MODEM_W Current File : SC7702_sc7715_modem.bin Flashing now ... [FlashProc] : Ok! [FlashProc] : CODE Current ID : DSP_W Current File : DSP_DM_G2.bin Flashing now ... [FlashProc] : Ok! [FlashProc] : CODE Current ID : MODEM_WCN Current File : SC8800G_sc7715_wcn_modem.bin Flashing now ... [FlashProc] : Ok! [FlashProc] : CODE Current ID : BOOTLOGO Current File : LOGO.bmp Flashing now ... [FlashProc] : Ok! [FlashProc] : CODE Current ID : FASTBOOT_LOGO Current File : LOGO.bmp(1) Flashing now ... [FlashProc] : Ok! [FlashProc] : CODE Current ID : BOOT Current File : boot.img Flashing now ... [FlashProc] : Ok! [FlashProc] : ERASE Current ID : FLASH Current Part : wruntimenv1 [FlashProc] : Ok! [FlashProc] : ERASE Current ID : FLASH_WCN Current Part : wcnruntimenv1 [FlashProc] : Ok! [FlashProc] : IMAGE Current ID : SYSTEM Current File : system.img Flashing now ... [FlashProc] : Ok! [FlashProc] : IMAGE Current ID : CACHE Current File : cache.img Flashing now ... [FlashProc] : Ok! [FlashProc] : CODE Current ID : RECOVERY Current File : recovery.img Flashing now ... [FlashProc] : Ok! [FlashProc] : IMAGE Current ID : USERDATA Current File : userdata.img Flashing now ... [FlashProc] : Ok! [FlashProc] : ERASE Current ID : ERASEMISC Current Part : misc [FlashProc] : Ok! [FlashProc] : BOOTCODE Current ID : UBOOTLOADER Current File : u-boot.bin Flashing now ... [FlashProc] : Ok! Elapsed: 00:03:28 Reconnect Power/Cable! Finish at : [22.03.2017 / 9:52:50] Последний раз редактировалось gulka; 22.03.2017 в 11:54. |
|
|
|
|
12.04.2017, 17:13
|
#71 |
|
Пользователь
Регистрация: 01.04.2006
Адрес: Россия
Сообщений: 339
Поблагодарил: 68
Поблагодарили 72 раз за 37 сообщений
Репа: 38 |
Прошивка Dexp E140
Код:
Card found: S/N : 3016AAE5 , v0135 Chinese Miracle II [SPD module] v 1.24 Loading : E140_R01_22.11.2016_V1.5.pac CRVersion : BP_R1.0.0 PacCPUinfo : SC7731_NoISD PacVersion : E140_R01_22.11.2016_V1.5 FastCheck : 0x003D8EDF60 Loading files ... File : fdl1.bin File : fdl2.bin File : nvitem.bin File : nvitem_wcn.bin File : prodnv.img File : u-boot-spl-16k.bin File : SC7702_sc7731g_band128.bin File : DSP_DM_G2.bin File : SC8800G_x30g_wcn_dts_modem.bin File : boot.img File : recovery.img File : system.img File : userdata.img File : Ixion_E140_logo.bmp File : Ixion_E140_logo.bmp(1) File : cache.img File : u-boot.bin File : SC7731_NoISD.xml Load Ok! Operation : Flash [ v1.24 ] ======= Flash Files set for flashing : [ MCU ] : E140_R01_22.11.2016_V1.5.pac CRVersion : BP_R1.0.0 PacCPUinfo : SC7731_NoISD PacVersion : E140_R01_22.11.2016_V1.5 File : fdl1.bin File : fdl2.bin File : nvitem.bin File : nvitem_wcn.bin File : prodnv.img File : u-boot-spl-16k.bin File : SC7702_sc7731g_band128.bin File : DSP_DM_G2.bin File : SC8800G_x30g_wcn_dts_modem.bin File : boot.img File : recovery.img File : system.img File : userdata.img File : Ixion_E140_logo.bmp File : Ixion_E140_logo.bmp(1) File : cache.img File : u-boot.bin 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 35 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable PickUp loaders from pac FDL Ready! Boot Ver : Spreadtrum Boot Block version 1.1 Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! PMTManager : Load 0x17 records PMTManager : PMT Update Ok! Flashing now [FlashProc] : CODE Current ID : PRODNV Current File : prodnv.img Flashing now ... [FlashProc] : Ok! [FlashProc] : ERASE Current ID : ERASEUBOOT Current Part : uboot [FlashProc] : Ok! [FlashProc] : BOOTCODE Current ID : SPLLOADER Current File : u-boot-spl-16k.bin Flashing now ... [FlashProc] : Ok! [FlashProc] : CODE Current ID : MODEM_W Current File : SC7702_sc7731g_band128.bin Flashing now ... [FlashProc] : Ok! [FlashProc] : CODE Current ID : DSP_W Current File : DSP_DM_G2.bin Flashing now ... [FlashProc] : Ok! [FlashProc] : CODE Current ID : MODEM_WCN Current File : SC8800G_x30g_wcn_dts_modem.bin Flashing now ... [FlashProc] : Ok! [FlashProc] : CODE Current ID : BOOT Current File : boot.img Flashing now ... [FlashProc] : Ok! [FlashProc] : CODE Current ID : RECOVERY Current File : recovery.img Flashing now ... [FlashProc] : Ok! [FlashProc] : IMAGE Current ID : SYSTEM Current File : system.img Flashing now ... [FlashProc] : Ok! [FlashProc] : IMAGE Current ID : USERDATA Current File : userdata.img Flashing now ... [FlashProc] : Ok! [FlashProc] : CODE Current ID : BOOTLOGO Current File : Ixion_E140_logo.bmp Flashing now ... [FlashProc] : Ok! [FlashProc] : CODE Current ID : FASTBOOT_LOGO Current File : Ixion_E140_logo.bmp(1) Flashing now ... [FlashProc] : Ok! [FlashProc] : ERASE Current ID : FLASH Current Part : wruntimenv1 [FlashProc] : Ok! [FlashProc] : ERASE Current ID : FLASH_WCN Current Part : wcnruntimenv1 [FlashProc] : Ok! [FlashProc] : IMAGE Current ID : CACHE Current File : cache.img Flashing now ... [FlashProc] : Ok! [FlashProc] : ERASE Current ID : ERASEMISC Current Part : misc [FlashProc] : Ok! [FlashProc] : BOOTCODE Current ID : UBOOTLOADER Current File : u-boot.bin Flashing now ... [FlashProc] : Ok! Elapsed: 00:05:36 Reconnect Power/Cable! |
|
|
|
|
17.04.2017, 12:55
|
#72 |
|
Супермодератор
Регистрация: 10.11.2005
Адрес: Russia
Сообщений: 2,979
Поблагодарил: 805
Поблагодарили 6,954 раз за 1,595 сообщений
Репа: 1190 |
teXet X-mini 2 TM-3500 прошивка
Operation : Read FullFlash [ v1.24 ] Код:
1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 40 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC7715 Loader NAND v1.1 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected NAND Flash , Structure detect Ok! [FW_READER] : Step #1 Passed! [FW_READER] : Step #2 Passed! [FW_READER] : Initialize Ok , 0x13 , NAND : b256k [FW_READER] : Step #3 Passed! Model Name : scx15_sp7715ga_FS003plus_NativeUIhvga Model Brand : teXet Model Device: tm3500 AndrVersion : 4.4.2 BaseBand CPU: SCX15_SP7715GA_FS003 Project Ver : V1.1.KK.rus.teXet.20150925.104641 Model Ext : TM-3500 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv_b256k.img [Read Ok] : nvitem_w.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : sc7715_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : CP2._CP2_WCN_14C_W15.23.1_Release.bin [Read Ok] : logo_320x480.bin [Read Ok] : boot.img [Read Ok] : system_b256k.img [Read Ok] : cache_b256k.img [Read Ok] : recovery.img [Read Ok] : userdata_b256k.img AndroidInfo created Firmware Size : 287 MiB Saved to : C:\Users\TIMUR\Desktop\SCX15_SP7715GA_FS003_[NAND_b256k]_tm3500_4.4.2_V1.1.KK.rus.teXet.20150925.104641_TM-3500\ Done! Elapsed: 00:07:03 Reconnect Power/Cable! Operation : Convert InfinitySC to SPRD PAC [ v1.24 ] Код:
Target : SCX15_SP7715GA_FS003_[NAND_b256k]_tm3500_4.4.2_V1.1.KK.rus.teXet.20150925.104641_TM-3500 Step #1 : Identify MEMORY : NAND LAYOUT : 256 KiB Step #2 : Select logic Select Logic : SC7715 Step #3 : Processing data Build PAC [ADD FILE] : nvitem_w.bin [ADD FILE] : nvitem_wcn.bin [ADD FILE] : prodnv_b256k_p4k.img [ADD FILE] : u-boot-spl-16k.bin [ADD FILE] : sc7715_modem.bin [ADD FILE] : DSP_DM_Gx.bin [ADD FILE] : CP2._CP2_WCN_14C_W15.23.1_Release.bin [ADD FILE] : logo_320x480.bin [ADD FILE] : boot.img [ADD FILE] : system_b256k_p4k.img [ADD FILE] : cache_b256k_p4k.img [ADD FILE] : recovery.img [ADD FILE] : userdata_b256k_p4k.img [ADD FILE] : u-boot.bin Build Ok! Result : 0x0015 Sign PAC ... Sign Ok! FW compiled! Elapsed: 00:01:03 Saved to : SCX15_SP7715GA_FS003_[NAND_b256k]_tm3500_4.4.2_V1.1.KK.rus.teXet.20150925.104641_TM-3500.pac Done! |
|
|
|
|
20.04.2017, 19:10
|
#73 |
|
Супермодератор
Регистрация: 10.11.2005
Адрес: Russia
Сообщений: 2,979
Поблагодарил: 805
Поблагодарили 6,954 раз за 1,595 сообщений
Репа: 1190 |
BQ-5082 Sense 2 Прошивка
Set mode to : SP [SC773x] eMMC [Android 6.x] Operation : Read FullFlash [ v1.25 ] Код:
1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 40 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC7731 Crev eMMC Loader v2.0 Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 40 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC7731 Crev eMMC Loader v2.0 Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 40 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC7731 Crev eMMC Loader v2.0 Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : t13_x163_S015_invens_64_4_dt Model Brand : BQ Model Device: t13_x163_S015_invens_64_4 AndrVersion : 5.1 BaseBand CPU: T13_BOPAI_64_4 Project Ver : HWD_20170317 Model Ext : BQ-5082 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731C_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_480x854.bin Skip [EMP] : FBOOTLOGO Skip [EMP] : THIRDLOGO Skip [EMP] : FORTHLOGO [Read Ok] : boot.img [Read Ok] : system.img [Read Ok] : oem.img [Read Ok] : sysinfo.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 2078 MiB Saved to : C:\Users\TIMUR\Desktop\T13_BOPAI_64_4_t13_x163_S015_invens_64_4_5.1_HWD_20170317_BQ-5082\ Done! Elapsed: 00:07:39 Reconnect Power/Cable! Operation : Convert InfinitySC to SPRD PAC [ v1.25 ] Target : T13_BOPAI_64_4_t13_x163_S015_invens_64_4_5.1_HWD_20170317_BQ-5082 Step #1 : Identify MEMORY : eMMC LAYOUT : eMMC NORMAL Step #2 : Select logic Select Logic : SC7731 Step #3 : Processing data Build PAC [ADD FILE] : nvitem_w.bin [ADD FILE] : nvitem_wcn.bin [ADD FILE] : prodnv.img [ADD FILE] : u-boot-spl-16k.bin [ADD FILE] : sc7731C_CP0_modem.bin [ADD FILE] : DSP_DM_Gx.bin [ADD FILE] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin [ADD FILE] : logo_480x854.bin [ADD FILE] : boot.img [ADD FILE] : system.img [ADD FILE] : oem.img [ADD FILE] : sysinfo.img [ADD FILE] : cache.img [ADD FILE] : recovery.img [ADD FILE] : userdata.img [ADD FILE] : u-boot.bin Build Ok! Result : 0x0019 Sign PAC ... Sign Ok! FW compiled! Elapsed: 00:08:45 Saved to : T13_BOPAI_64_4_t13_x163_S015_invens_64_4_5.1_HWD_20170317_BQ-5082.pac Done! |
|
|
|
| Следующие пользователи поблагодарили gulka за это сообщение: | ddilshod93 (20.04.2017) |
|
12.05.2017, 13:18
|
#74 |
|
Пользователь
Регистрация: 20.04.2008
Сообщений: 55
Поблагодарил: 17
Поблагодарили 9 раз за 6 сообщений
Репа: 16 |
Samsung E1202I user Lock
код телефона - справился
==== Wait for phone... Phone found! [ 80 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending boot ... Boot Sent , starting... Boot Ver : Spreadtrum Boot Block version 1.2 Boot Ok CPU ID : 6530 , FDLStat : 00C0 [0] Flash DIE : 00C8 0060 0017 0000 [0] Flash VEN : GigaDevice , GD25LQ64 [0] Flash CAP : 00800000 Check data... Can take some time User Code : 1695 Done! Elapsed: 00:00:25 Reconnect Power/Cable! |
|
|
|
| Следующие пользователи поблагодарили Mr.Sunn за это сообщение: | madar (11.06.2017) |
|
16.05.2017, 14:34
|
#75 |
|
Почетный пользователь
Регистрация: 03.02.2007
Адрес: HH/Germany
Сообщений: 1,175
Поблагодарил: 347
Поблагодарили 1,024 раз за 473 сообщений
Репа: 454 |
Swees X464 SP7731
Снял код и слил фул.
Read Full
|
|
|
|
|
17.05.2017, 15:25
|
#76 |
|
Пользователь
Регистрация: 20.04.2008
Сообщений: 55
Поблагодарил: 17
Поблагодарили 9 раз за 6 сообщений
Репа: 16 |
S-tell C255i
S tell c255i Read pfhonebook read full & flash
S tell c255i Read pfhonebook read full & flash
|
|
|
|
|
19.05.2017, 12:56
|
#77 |
|
Пользователь
Регистрация: 17.01.2013
Адрес: Узбекистан / Бухара
Сообщений: 43
Поблагодарил: 17
Поблагодарили 17 раз за 11 сообщений
Репа: 55 |
ZTE Blade A5 Pro Sim Unlock Done 1-Click!
Код:
Operation : SP Unlock [ v1.26 ] Mode : DirectUnlock 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 52 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x Android 5.x eMMC v1.0 Inf Sending FLASH FDL FLASH FDL Ready! Boot Ok! Detected eMMC Flash , Structure detect Ok! Checking Structure ... SimLock state : Locked! Unlocking ... Unlock Done! Elapsed: 00:00:18 Reconnect Power/Cable!
__________________
век живи — век учись |
|
|
|
|
14.07.2017, 13:48
|
#78 |
|
Супермодератор
Регистрация: 10.11.2005
Адрес: Russia
Сообщений: 2,979
Поблагодарил: 805
Поблагодарили 6,954 раз за 1,595 сообщений
Репа: 1190 |
Micromax Q402 Bolt Pace Билайн разлочка
Код:
Operation : SP Unlock [ v1.27 ] Mode : DirectUnlock 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 50 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! Detected eMMC Flash , Structure detect Ok! Checking Structure ... SimLock state : Locked! Unlocking ... Unlock Done! Elapsed: 00:00:34 Reconnect Power/Cable! |
|
|
|
| Следующие пользователи поблагодарили gulka за это сообщение: | Bexruz.19 (08.12.2017) |
|
08.08.2017, 10:52
|
#79 |
|
Пользователь
Регистрация: 17.01.2013
Адрес: Узбекистан / Бухара
Сообщений: 43
Поблагодарил: 17
Поблагодарили 17 раз за 11 сообщений
Репа: 55 |
Nokia 6700c read code
Код:
Operation : Read User Code [ v1.27 ] 1. Remove battery. Insert USB cable 2. Press and hold BootKey ( Skip, if use BootCable ) 3. Insert battery ==== Wait for phone... Phone found! [ 53 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending boot ... Boot Sent , starting... Boot Ver : Spreadtrum Boot Block version 1.2 Boot Ok CPU ID : 6531 , FDLStat : 0100 [0] Flash DIE : 00EF 0040 0016 0000 [0] Flash VEN : Winbond , W25Q32 [0] Flash CAP : 00400000 Check data... Can take some time User Code : 54321 Done! Elapsed: 00:00:22 Reconnect Power/Cable!
__________________
век живи — век учись |
|
|
|
|
09.08.2017, 08:33
|
#80 |
|
Пользователь
Регистрация: 17.01.2013
Адрес: Узбекистан / Бухара
Сообщений: 43
Поблагодарил: 17
Поблагодарили 17 раз за 11 сообщений
Репа: 55 |
DEXP IXION E350
READ Pattern Код:
Operation : Read PatternLock [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 77 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SPRD 773x eMMC loader v3 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! Checking Structure ... Detected eMMC Flash , Structure detect Ok! FlashMode Set : Ok! Reading PatternLock ... Read Ok , decrypt PatternLock Sequence : 1589 Done! Elapsed: 00:00:22 Reconnect Power/Cable! Код:
Operation : Read FullFlash [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 77 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SPRD 773x eMMC loader v3 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 77 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SPRD 773x eMMC loader v3 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 77 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SPRD 773x eMMC loader v3 Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : E350 Model Brand : Ixion Model Device: E350 AndrVersion : 5.1 BaseBand CPU: E350 Project Ver : E350_R01_16.03.2017_V1.2 Model Ext : Ixion E350 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731g_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_720x1280.bin [Read Ok] : fblogo_720x1280.bin [Read Ok] : boot.img [Read Ok] : system.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 1348 MiB Saved to : C:\E350_E350_5.1_E350_R01_16.03.2017_V1.2_Ixion_E350_0909082017\ Done! Elapsed: 00:09:07 Reconnect Power/Cable!
__________________
век живи — век учись |
|
|
|
|
|
|
Похожие темы
|
||||
| Тема | Автор | Раздел | Ответов | Последнее сообщение |
| Обновление ПО для NCK Dongle / NCK Box | serpas007 | NCK Dongle / NCK Box Team | 184 | 18.02.2023 23:16 |
| Успешное применение, без комментариев [CM2MTK MediaTek] | yurii-62 | Infinity Box | 316 | 26.08.2022 00:51 |
| Успешное применение Medusa | fedja | Medusa JTAG Box | 0 | 06.12.2016 23:22 |
| Применение Infinity PinFinder без карты infinity | Romych78 | Infinity Box | 5 | 04.02.2009 12:14 |
Линейный вид
