Успешное применение, без комментариев [InfinityBox CM2 SPD] - GSM Форум

**gulka** · 19.02.2018, 13:08

BQ-7083G Light REV Project Ver : BQru-7083_20170930 Прошивка Firmware

Operation : Read FullFlash [ v1.27 ]

**gulka** · 25.02.2018, 12:54

BQ-1081G GRACE Прошивка, Firmware

Read FullFlash, PAC file

**gulka** · 01.03.2018, 10:31

BQ-7083G Light REV Project Ver : BQru-7083_20171116 Прошивка Firmware

Operation : Read FullFlash [ v1.27 ]

**gulka** · 06.03.2018, 11:41

BQ-4072 STRIKE MINI Прошивка Firmware pac

Read FullFlash [ v1.27 ]

salimxon · 17.03.2018, 10:30

Fly FS 407 Frp reset...

Код:

Reading extended info ... 

Model Name  : FS407
Model Brand : Fly
Model Device: Stratus_6
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
CompileDate : 07.11.2016 2:57:37
Project Ver : SW11_FLY_FS407_2016_11_07
Model Ext   : FS407

ExtraInfo : HWInfo exists!!! This phone have DYNAMIC HW settings!!!

Elapsed: 00:00:22



 ====  Wait for phone...

Phone found! [ 5 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x00000000701F7000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

19.02.2018, 13:08	#1
gulka Супермодератор Регистрация: 10.11.2005 Адрес: Russia Сообщений: 2,979 Поблагодарил: 805 Поблагодарили 6,954 раз за 1,595 сообщений Репа: 1190	BQ-7083G Light REV Project Ver : BQru-7083_20170930 Прошивка Firmware Operation : Read FullFlash [ v1.27 ] Operation : Read FullFlash [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 93 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x eMMC Loader v7 InfinityBox Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 93 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x eMMC Loader v7 InfinityBox Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 93 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x eMMC Loader v7 InfinityBox Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : BQru-7083 Model Brand : BQru Model Device: BQru-7083 AndrVersion : 7.0 BaseBand CPU: BQRU-7083 Project Ver : BQru-7083_20170930 Model Ext : BQru-7083 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731C_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.21.3_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_1024x600.bin [Read Ok] : fblogo_1024x600.bin [Read Ok] : boot.img [Read Ok] : system.img [Read Ok] : trustos.bin [Read Ok] : vmm.bin [Read Ok] : sysinfo.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 2929 MiB Saved to : C:\Users\tsaidov72\Desktop\BQRU-7083_BQru-7083_7.0_BQru-7083_20170930_BQru-7083\ Done! Elapsed: 00:10:13 Reconnect Power/Cable! __________________ Скучно.....хочется компанию....Маленькую нефтянную компанию paypal.me/STimur Последний раз редактировалось gulka; 01.03.2018 в 10:31.

25.02.2018, 12:54	#2
gulka Супермодератор Регистрация: 10.11.2005 Адрес: Russia Сообщений: 2,979 Поблагодарил: 805 Поблагодарили 6,954 раз за 1,595 сообщений Репа: 1190	BQ-1081G GRACE Прошивка, Firmware Read FullFlash, PAC file Set mode to : SP [SC773x] eMMC [Android 6.x] Operation : Read FullFlash [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 20 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC7731 Crev eMMC Loader v2.0 Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 20 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC7731 Crev eMMC Loader v2.0 Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 20 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC7731 Crev eMMC Loader v2.0 Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : BQru-1081G Model Brand : BQru Model Device: BQru-1081G AndrVersion : 7.0 BaseBand CPU: BQRU-1081G Project Ver : BQru-1081G_20170922 Model Ext : BQru-1081G [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731C_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.21.3_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_1024x600.bin [Read Ok] : fblogo_1024x600.bin [Read Ok] : boot.img [Read Ok] : system.img [Read Ok] : trustos.bin [Read Ok] : vmm.bin [Read Ok] : sysinfo.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 2929 MiB Saved to : I:\BQRU-1081G_BQru-1081G_7.0_BQru-1081G_20170922_BQru-1081G\ Done! Elapsed: 00:09:15 Reconnect Power/Cable! Operation : Convert InfinitySC to SPRD PAC [ v1.27 ] Target : BQRU-1081G_BQru-1081G_7.0_BQru-1081G_20170922_BQru-1081G Step #1 : Identify MEMORY : eMMC LAYOUT : eMMC NORMAL Step #2 : Select logic Select Logic : SC7731 Step #3 : Processing data Build PAC [ADD FILE] : nvitem_w.bin [ADD FILE] : nvitem_wcn.bin [ADD FILE] : prodnv.img [ADD FILE] : u-boot-spl-16k.bin [ADD FILE] : sc7731C_CP0_modem.bin [ADD FILE] : DSP_DM_Gx.bin [ADD FILE] : sc8830g_modem_CP2_WCN_Trunk_W17.21.3_Release.bin [ADD FILE] : logo_1024x600.bin [ADD FILE] : fblogo_1024x600.bin [ADD FILE] : boot.img [ADD FILE] : system.img [ADD FILE] : sysinfo.img [ADD FILE] : cache.img [ADD FILE] : recovery.img [ADD FILE] : userdata.img [ADD FILE] : u-boot.bin Build Ok! Result : 0x0018 Sign PAC ... Sign Ok! FW compiled! Elapsed: 00:01:26 Saved to : BQRU-1081G_BQru-1081G_7.0_BQru-1081G_20170922_BQru-1081G.pac Done! Operation : Read NV [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 20 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC7731 Crev eMMC Loader v2.0 Sending FLASH FDL FLASH FDL Ready! Boot Ok! Detected eMMC Flash , Structure detect Ok! Read GSM NV Read WCN NV Read Ok , 0xCA53 Saved to : I:\BQRU-1081G_BQru-1081G_7.0_BQru-1081G_20170922_BQru-1081G\CX77xx_SPDNV.spdnv Elapsed: 00:00:37 Reconnect Power/Cable! __________________ Скучно.....хочется компанию....Маленькую нефтянную компанию paypal.me/STimur

01.03.2018, 10:31	#3
gulka Супермодератор Регистрация: 10.11.2005 Адрес: Russia Сообщений: 2,979 Поблагодарил: 805 Поблагодарили 6,954 раз за 1,595 сообщений Репа: 1190	BQ-7083G Light REV Project Ver : BQru-7083_20171116 Прошивка Firmware Operation : Read FullFlash [ v1.27 ] Chinese Miracle II [SPD module] v 1.27 Set mode to : SP [SC773x] eMMC [Android 7.x] Operation : Read FullFlash [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 20 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x eMMC Loader v7 InfinityBox Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 20 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x eMMC Loader v7 InfinityBox Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 20 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x eMMC Loader v7 InfinityBox Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : BQru-7083 Model Brand : BQru Model Device: BQru-7083 AndrVersion : 7.0 BaseBand CPU: BQRU-7083 Project Ver : BQru-7083_20171116 Model Ext : BQru-7083 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731C_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.21.3_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_1024x600.bin [Read Ok] : fblogo_1024x600.bin [Read Ok] : boot.img [Read Ok] : system.img [Read Ok] : trustos.bin [Read Ok] : vmm.bin [Read Ok] : sysinfo.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 2929 MiB Saved to : C:\Users\tsaidov72\Desktop\BQRU-7083_BQru-7083_7.0_BQru-7083_20171116_BQru-7083\ Done! Elapsed: 00:09:31 Reconnect Power/Cable! __________________ Скучно.....хочется компанию....Маленькую нефтянную компанию paypal.me/STimur Последний раз редактировалось gulka; 01.03.2018 в 10:43.

06.03.2018, 11:41	#4
gulka Супермодератор Регистрация: 10.11.2005 Адрес: Russia Сообщений: 2,979 Поблагодарил: 805 Поблагодарили 6,954 раз за 1,595 сообщений Репа: 1190	BQ-4072 STRIKE MINI Прошивка Firmware pac Read FullFlash [ v1.27 ] Operation : Read FullFlash [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 22 ] Port Opened Sync... Initial Boot Failed! Boot not done, reason : Wrong BootKeys Hint : Reset power and use ANOTHER BootKey ( VOL up or VOL down ) Reconnect Power/Cable! Operation : Read FullFlash [ v1.27 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 3. Insert cable ==== Wait for phone... Phone found! [ 3 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x eMMC Loader v7 InfinityBox Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 3 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x eMMC Loader v7 InfinityBox Sending FLASH FDL FLASH FDL Ready! Boot Ok! - > Wait phone connected ... Phone found! [ 3 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC773x eMMC Loader v7 InfinityBox Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : BQru_4072 Model Brand : BQru Model Device: BQru_4072 AndrVersion : 7.0 BaseBand CPU: BQRU-4072 Project Ver : NRD90M release-keys Model Ext : BQru-4072 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731C_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.21.3_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_480x800.bin [Read Ok] : fblogo_480x800.bin [Read Ok] : boot.img [Read Ok] : system.img [Read Ok] : trustos.bin [Read Ok] : vmm.bin [Read Ok] : sysinfo.img [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 3196 MiB Saved to : C:\Users\timur\Desktop\BQRU-4072_BQru_4072_7.0_NRD90M_release-keys_BQru-4072\ Done! Elapsed: 00:11:22 Reconnect Power/Cable! __________________ Скучно.....хочется компанию....Маленькую нефтянную компанию paypal.me/STimur

Похожие темы
Тема	Автор	Раздел	Ответов	Последнее сообщение
Обновление ПО для NCK Dongle / NCK Box	serpas007	NCK Dongle / NCK Box Team	184	18.02.2023 23:16
Успешное применение, без комментариев [CM2MTK MediaTek]	yurii-62	Infinity Box	316	26.08.2022 00:51
Успешное применение Medusa	fedja	Medusa JTAG Box	0	06.12.2016 23:22
Применение Infinity PinFinder без карты infinity	Romych78	Infinity Box	5	04.02.2009 12:14