MTK/Mediatek v2.00 r[X] [Только успешное применение] - GSM Форум

ddilshod93 · 04.05.2018, 16:25

Meizu U10

Operation : Identify [ v2.00 r2 ]

Operation : Memory Tool Init [ v2.00 r2 ]

Код:

Operation : Memory Tool Init [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM22)
MODE : PRELOADER PORT
PORT : 22
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000007
BROM : SecMode  : SBC+SLA+SDA
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ... 
AGENT : DA_PL.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100513832334D42001BD2E45CA38B
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : Q823MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

        RNID : 3D6002C6CD6AB673B20558DAF5F94663

DA : USB : HIGH-SPEED

Boot done!

Set default path : C:\InfinityBox\CM2MT2\phdata\

Ready!

Operation : Read Memory  [ v2.00 r2 ]

Reading selected partitions [1]
[0] Read partition : NVRAM
Saved to : C:\InfinityBox\CM2MT2\phdata\NVRAM.bin

Operation finished!

Operation : Read Memory  [ v2.00 r2 ]

Reading selected partitions [1]
[0] Read partition : DEVINFO
Saved to : C:\InfinityBox\CM2MT2\phdata\DEVINFO.bin

Operation finished!

Operation : Read Memory  [ v2.00 r2 ]

Reading selected partitions [1]
[0] Read partition : PGPT
Saved to : C:\InfinityBox\CM2MT2\phdata\PGPT.bin

Operation finished!

Operation : Read Memory  [ v2.00 r2 ]

Reading selected partitions [1]
[0] Read partition : NVDATA
Saved to : C:\InfinityBox\CM2MT2\phdata\NVDATA.bin

Operation finished!


Close MemoryTool session

Done!
Elapsed: 00:01:57

Reconnect Power/Cable!

Operation : Read Firmware [ v2.00 r2 ]

Код:

Operation : Read Firmware [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM22)
MODE : PRELOADER PORT
PORT : 22
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000007
BROM : SecMode  : SBC+SLA+SDA
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA ... 
AGENT : DA_PL.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ... 
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100513832334D42001BD2E45CA38B
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : Q823MB
        EMMC: 
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000

        RNID : 3D6002C6CD6AB673B20558DAF5F94663

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-08-05
Build Time     : 1471368332
Board Platform : mt6750
Product Brand  : Meizu
Product Manfct : Meizu
Display ID     : Flyme 5.2.3.0Y
Product Model  : U10
Product Name   : meizu_U10
Product Device : U10
Product Board  : U10
Product Info   : U10

MT6750__Meizu__U10__6.0__Flyme_5.2.3.0Y__MRA58K__U10

Read : preloader.bin
Read : recovery.img
Read : custom.img
ExtSparse : Compression ratio : 48%
Read : proinfo.img
Read : devinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 29%
Read : cache.img
Read : userdata.img

FW Size  : 2.25 GB
Android Info saved : _Android_info.txt
Scatter  : MT6750_Android_scatter.txt
Saved to : C:\TEMP\MT6750__Meizu__U10__6.0__Flyme_5.2.3.0Y__MRA58K__U10\

Done!
Elapsed: 00:02:52

**gulka** · 10.05.2018, 10:01

Meizu M5 16GB read info, firmware factory

Operation : Identify [ v2.00 r2 ]

Operation : Read Firmware [ v2.00 r2 ]

10.05.2018, 10:01	#2
gulka Супермодератор Регистрация: 10.11.2005 Адрес: Russia Сообщений: 2,979 Поблагодарил: 805 Поблагодарили 6,954 раз за 1,595 сообщений Репа: 1190	Meizu M5 16GB read info, firmware factory Operation : Identify [ v2.00 r2 ] Operation : Identify [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000007 BROM : SecMode : SBC+SLA+SDA BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] EMMC: 150100513832334D4200D539965893F5 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : Q823MB EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x3A3E00000 [ 14,56 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000 RNID : B2EDD8D2B9D78B1D52F5DC70DA3A0DF6 DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2016-12-05 Build Time : 1481214711 Board Platform : mt6750 Product Brand : Meizu Product Manfct : Meizu Display ID : Flyme 5.2.10.0G Product Model : MEIZU_M5 Product Name : meizu_M5 Product Device : MEIZU_M5 Product Board : M5 Product Info : M5 Done! Elapsed: 00:00:12 Operation : Read Firmware [ v2.00 r2 ] Operation : Read Firmware [ v2.00 r2 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM4) MODE : PRELOADER PORT PORT : 4 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000007 BROM : SecMode : SBC+SLA+SDA BROM : PRELOADER PORT AGENT : Look for suitable BootChain in DA ... AGENT : DA_PL.bin AGENT : Found MT6755 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00040000 [ 256,00 KB ] DRAM: 0x80000000 [ 2,00 GB ] EMMC: 150100513832334D4200D539965893F5 EMMC: VEN : SAMSUNG \| OEM : 01 \| DEV : Q823MB EMMC: BOOT1 : 0x00400000 [ 4,00 MB ] BOOT2 : 0x00400000 [ 4,00 MB ] RPMB : 0x00400000 [ 4,00 MB ] USER : 0x3A3E00000 [ 14,56 GB ] CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000 RNID : B2EDD8D2B9D78B1D52F5DC70DA3A0DF6 DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2016-12-05 Build Time : 1481214711 Board Platform : mt6750 Product Brand : Meizu Product Manfct : Meizu Display ID : Flyme 5.2.10.0G Product Model : MEIZU_M5 Product Name : meizu_M5 Product Device : MEIZU_M5 Product Board : M5 Product Info : M5 MT6750__Meizu__MEIZU_M5__6.0__Flyme_5.2.10.0G__MRA 58K__M5 Read : preloader.bin Read : recovery.img Read : custom.img ExtSparse : Compression ratio : 82% Read : proinfo.img Read : devinfo.img Read : md1rom.img Read : md1dsp.img Read : md1arm7.img Read : md3rom.img Read : nvram.bin Read : lk.bin Read : boot.img Read : logo.bin Read : tz.img Read : secro.img Read : system.img ExtSparse : Compression ratio : 26% Read : cache.img Read : userdata.img FW Size : 2,15 GB Android Info saved : _Android_info.txt Scatter : MT6750_Android_scatter.txt Saved to : C:\Users\timur\Desktop\MT6750__Meizu__MEIZU_M5__6. 0__Flyme_5.2.10.0G__MRA58K__M5\ Done! Elapsed: 00:04:16 __________________ Скучно.....хочется компанию....Маленькую нефтянную компанию paypal.me/STimur

Похожие темы
Тема	Автор	Раздел	Ответов	Последнее сообщение
Успешное применение, без комментариев [CM2MTK MediaTek]	yurii-62	Infinity Box	316	26.08.2022 00:51
Chinese Miracle-2 MTK/Mediatek v2.00 r2 - MT6739 support, SPUnlock and more	SurTaX	Infinity Box	0	02.05.2018 06:47