Успешное применение, без комментариев [CM2MTK MediaTek]

[Meret83]

BLU_DASH_L2 reset frp

Wait for phone...
Phone found! [ 87 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 11010030303447453001CC1D6D331381
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 11010030303447453001CC1D6D331381
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xC495F892BCF643CE972F1A92ABCA003A
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:29

[gulka]

Philips E331 Прошивка Firmware

Operation : Read Flash [ v1.58 ]

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 29 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 713339C6488D732748711735ABDD7F08
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F4 , [GigaDevice] GD25LQ128
[0] : FLASH_DIE : 00C8 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
SDS_INFO : 0x00FFE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ...

Read Flash now
Read Ok , 16777216 bytes read
Check and collect compile info
File_Info : FISE61A_11C_PCB01_gprs_MT6261_S00.E331_M6261_1743_ V11A_RU.bin
FileVersion : E331_M6261_1743_V11A_RU

[ScatCFG] : MT6261 / E331_M6261_1743_V11A_RU / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\FISE61A_11C_PCB01_g prs_MT6261_S00\

Done!
Elapsed: 00:00:55
Reconnect Power/Cable!

[gulka]

Прошивка Firmware nokia china L8star GTSTAR BM10

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 116 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CA02
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 1CF9DDFBECA6CEED45A070E12B8CAAD6
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000 
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003F8000 , 0x00008000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ... 

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : JT61D_M100_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2.bin
FileVersion : MAUI.11C.W13.52.MP.V2
Saved to : C:\InfinityBox\CM2MTK\Read_out\JT61D_M100_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!