CRUISER :проблемы призагрузке телефнов или при смене цвета

[WhiteE]

Сообщение от dervoyas

началось всё с k700i . лог вот :

System diagnostics passed.
Version 10.03 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8000
Protocol version: 3.1
Baudrate = 460800Bd
Phone color: None
Flash certificate: -
All threads terminated.
.

Ты не заметил что у тебя написано в логе!
Phone color: None
Flash certificate: -
У тебя флеха скорее всего дохлая или обрыв где-то.
Ко мне K700 приносили много с оторванными флехами.

[Reanimator]

Как вариант битый стабилизатор питания флэшки.

[dervoyas]

спасибо , просмотрю ещё раз .

сегодня пытаюсь программировать к500 ( там " минигарнитура " нчем не отключается , аппаратно проверял : там порядок ) , так во время анлок РСА опять просит передёрнуть АКБ. ( сколько их делал - ни разу такого не было !!!! ) . передёрнул - в этот раз процесс идёт далее , только вот какой лог ( не делает writing unsigned code ) GDFS вписывал при включённом РСА , финализацию GDFS не делает . ВОТ ЛОГ НА К500i :

System diagnostics passed.
Version 10.03 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8000
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 29
Phone color: Brown
Flash certificate: A1_SEMC
Trying Brown CID29 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
Applet ID: 060222 0202 CRUCXC1250166_1_SEMC_COMPACTPRODUCTION NAN
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 29
Analyzing configuration...
Reading primary certificate...
Primary certificate CID: 29
Primary certificate color: Brown
Secondary certificate not found.
GDFS configuration found.
OSE configuration found.
TestProgram configuration not found.
Analysing GDFS...
Done.
Analyzing RSA protection...
RSA protection is normal.
Phone hardware initialized OK

[ --- Change Certificate Color --- ]
Analyzing firmware...
Preparing to program flash...
Programming flash...
Primary certificate has been overwritten.
Time: 00:00:04
Flash process done.
Turning off phone...
Phone automatically detached.

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8000
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 29
Phone color: Brown
Flash certificate: A1_SEMC
Trying Brown CID29 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
Applet ID: 060222 0202 CRUCXC1250166_1_SEMC_COMPACTPRODUCTION NAN
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 29
Analyzing configuration...
Reading primary certificate...
Primary certificate CID: 29
Primary certificate color: Brown
Secondary certificate not found.
GDFS configuration found.
OSE configuration found.
TestProgram configuration not found.
Analysing GDFS...
Done.
Analyzing RSA protection...
RSA protection is normal.
Phone hardware initialized OK

[ --- Unlock RSA --- ]
Restarting phone...
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Applet ID: 040319 0923 LLECXC1326739_COMPACTCERTLOADER R2E
Defeated!
Sending CS applet...
The applet ignored baudrate change request!
Done.
Phone automatically detached.



No response from applet
Invalid response
Error: Could not initialize GDFS access.


хотя к600 делает без проблемм . чем ему помочь