N70 как правильно прошить?

[rmen]

После мучения с пониженной Е50 - вопрос решился, помог Brock, теперь наступила очередь N70- 3 штуки таких накопилась:

1. Тело на инфо не отвечает, при прошивке по методике Broka вот што выдал:
Make sure that phone is connected.
VPP is DISABLED.
Processing File: RM84_50609201.C0
Boot...
rap3gv2_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
h3_sam_nand_gbbm.fg
Erase RAP3 [00000000 - 0052AB0D]
Erase RAP3 [006A0000 - 006BFFFF]
Erase RAP3 [006DF000 - 006EFFFF]
Erase RAP3 [00700000 - 007EFFFF]
Erase APE [00000000 - 0000FFFF]
Erase APE [00010000 - 0001FFFF]
Erase APE [00020000 - 000203FF]
Erase APE [00050000 - 03ECFFFF]
Erase[68.92 MB]...
Waiting response for 320 Sec...in 5.30s
Flash[31.17 MB]...in 66.03s
* * Processed file in 80.86 seconds
Processing File: RM84_50705301.UDA
Boot...
rap3gv2_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
h3_sam_nand_gbbm.fg
Erase[0.00 MB]...
in 0.08s
Flash[3.75 MB]...in 13.47s
* * Processed file in 46.23 seconds
Extract content...fail
Processing File: RM84_50609201.V05
Boot...
rap3gv2_2nd.fg
RAP3Gv3_algo.fg
helen3_2nd.fg
h3_sam_nand_gbbm.fg
Erase APE [01DE0000 - 028FFFFF]
Erase APE [02900000 - 03ECFFFF]
Erase[32.94 MB]...
Waiting response for 320 Sec...in 2.89s
Flash[9.64 MB]...in 27.14s
* * Processed file in 39.59 seconds
* * * Phone flashing done in 4:10 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
Phone not responding, try to set manually!

На дисплее надпись горит тускло НОКИЯ и все висяк...


2. Второй инфо читает но при прошивке выдает следующее:

Phone is in: RF Innactive mode
Model: RM-84 (N70)
V 05wk07v31/27-10-05/RM-84 (c) Nokia.
Production serial number SVI953404
Product code 0524007
Module code
Basic production code 0522156
Flash code
Order number
Long production SN
MCU SW V 05wk07v31/27-10-05/RM-84/(c) Nokia.
HW 6012
PCI
RFIC 150a160e
DSP rolf_05wk07v21
Retu 32
Tahvo 52
IMEI: 359367004790531
WARNING: VPP pin is not connected, disabling VPP.
============= Set Flash mode for info =============
VBat is 3.90V

Vpp pin has 0.10V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Boot...
rap3gv2_2nd.fg
RAP3Gv3_algo.fg
BOOT OK...
Phone Type: BB5
------------------- SYSTEM ID Response: 7 blocks -------------
SYSTEM_ASIC_ID( RAP ):
000000010000022600010006000C192101002200
EM_ASIC_ID( RAP ):
00000232
EM_ASIC_ID( RAP ):
00000352
PUBLIC_ID( RAP ):
1C30010EE08F4951B83608892042308B71E3FE43
ASIC_MODE_ID( RAP ):
00
ROOT_KEY_HASH( RAP ):
E9EFF4BFAA5393217CA6B17755FC3E14
ROM_ID( RAP ):
F28A211FCEA7B19D
--------------- Device ID Response: 2 blocks -------------
Storage Device:
Owner Asic: RAP
Type: NOR Flash
Index: 0
Flash: Amd, 0001 0002 0000 0111
Storage Device Contents:
Owner Asic: RAP
000000000000000000000000000000000000
============= Set FBus mode for info =============
VBat is 3.93V

Vpp pin has 0.10V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 1, Bsi 0
Phone is in: Local mode
Model: RM-84 (N70)
V 05wk07v31/27-10-05/RM-84 (c) Nokia.
IMEI: 359367004790531
VPP is DISABLED.
Processing File: RM84_50609201.C0
Boot...
FAILED TO BOOT PHONE!!!
Make sure that phone is connected.

И все ... черный экран....


3. Третий вообще при подключению к боксу загорается вспышка и все не видится не флешится:
Phone is in: Phone is not responding, power on phone!
============= Set Flash mode for info =============
VBat is 3.96V

Vpp pin has 0.09V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
Boot...
Invalid response from RAP3 boot( cable problem/damaged RAP3 chip/damaged phone power circuit
============= Set FBus mode for info =============
VBat is 3.96V

Vpp pin has 0.09V, Not Connected
Pins:
Mbus 1, Box Tx 1, Box Rx 0, Bsi 0
Processing File: RM84_50609201.C0
Boot...
FAILED TO BOOT PHONE!!!
Make sure that phone is connected.
При попытке прошить PM все телефоны просят выход SX4 сервер

*3вызов и кнопка вкл. не помогает